Core changes and CSAVE support.
1. Added support for cassette save. To use: A) You have to have a file [anyname.cas] which is larger than needed. B) Select the file through the UI Menu 'Save Cassette'. C)Set 'Cass Rwd=0 / Rec=1' to 1. D) Issue your 'CSAVE "NAME"' E) When done, set 'Cass Rwd=0 / Rec=1' to 0 to complete the write. The file can now be loaded or copied. Note a dummy file of a specific size can be created in the MiSTer SSH shell in the /media/fat/games/coco3 with the command: 'truncate -s 65536 tapefileame.cas'. [Note do NOT use over 65536 file length] 2. Fixed serial interrupt [6551] to not be functional on slot 3 [carts]. 3. Modification of sys_top.v to override use of USER_IO for HDMI - so it can be used for logic analyzer debug. This will only occur when `define Config_Debug is enabled in config.v. 4. Fixed MUGS of powerup issue occurring on some MiSTer units. 5. Fixed incorrect application of GIME_IRQ on legacy interrupts. Fixed race condition on reading IRQ status vs clearing the interrupt. 6. Improved Castle of Tharoggad. App now loads but locks as the graphics animate. This change improved mmu usage through to CARTS. 7. Builds now keep track of multiple builds in the same date. It shows as V240512-001 in the menus. Its also exposed to BASIC and a boot.vhd which can be enabled to autorun is supplied in the archive to show how it works. 8. Additionally, on the boot.vhd disk, is a program which demonstrated how to load a font - IBMFONT.BAS. Run it and it maps a font much like the IBM font to the 80 column format. Also, a file called TESTRTC.BAS pulls the MiSTer RTC values exposed in BASIC to display a clock. 9. Large improvement in the Timer function. Code closer emulates COCO3 Timer. Fixes Sliphead cart. 10. In the 20231023 release the wd1773 instances were reduced to 1 for the FDC and one for the FDC. This saved space but introduced a bug when using multiple drives at the same time - like a copy command. This change was removed and the copy command works again. To Do... 1. Add Speech / Music cart 2. Fix Castle of Tharoggad
This commit is contained in:
1 parent
a3373d34b9
commit
1da70a7929
27 files changed
+1113
-850
No files matched your search
@@ -10,3 +10,4 @@ jtag.cdf
|
|||||||
greybox_tmp/cbx_args.txt
|
greybox_tmp/cbx_args.txt
|
||||||
*/greybox_tmp/cbx_args.txt
|
*/greybox_tmp/cbx_args.txt
|
||||||
changes.txt
|
changes.txt
|
||||||
|
rtl/config_inc.sv
|
||||||
Binary file not shown.
@@ -9,9 +9,9 @@
|
|||||||
# --------------------------------------------------------------------------
|
# --------------------------------------------------------------------------
|
||||||
|
|
||||||
set_global_assignment -name TOP_LEVEL_ENTITY sys_top
|
set_global_assignment -name TOP_LEVEL_ENTITY sys_top
|
||||||
set_global_assignment -name PARTITION_NETLIST_TYPE SOURCE -section_id Top
|
#set_global_assignment -name PARTITION_NETLIST_TYPE SOURCE -section_id Top
|
||||||
set_global_assignment -name PARTITION_FITTER_PRESERVATION_LEVEL PLACEMENT_AND_ROUTING -section_id Top
|
#set_global_assignment -name PARTITION_FITTER_PRESERVATION_LEVEL PLACEMENT_AND_ROUTING -section_id Top
|
||||||
set_global_assignment -name PARTITION_COLOR 16764057 -section_id Top
|
#set_global_assignment -name PARTITION_COLOR 16764057 -section_id Top
|
||||||
|
|
||||||
set_global_assignment -name LAST_QUARTUS_VERSION "17.0.2 Lite Edition"
|
set_global_assignment -name LAST_QUARTUS_VERSION "17.0.2 Lite Edition"
|
||||||
|
|
||||||
@@ -73,9 +73,9 @@ set_location_assignment PIN_U9 -to ADC_CONVST
|
|||||||
set_location_assignment PIN_V10 -to ADC_SCK
|
set_location_assignment PIN_V10 -to ADC_SCK
|
||||||
set_location_assignment PIN_AC4 -to ADC_SDI
|
set_location_assignment PIN_AC4 -to ADC_SDI
|
||||||
set_location_assignment PIN_AD4 -to ADC_SDO
|
set_location_assignment PIN_AD4 -to ADC_SDO
|
||||||
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to ARDUINO_IO[*]
|
#set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to ARDUINO_IO[*]
|
||||||
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to ARDUINO_IO[*]
|
#set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to ARDUINO_IO[*]
|
||||||
set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to ARDUINO_IO[*]
|
#set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to ARDUINO_IO[*]
|
||||||
set_location_assignment PIN_U14 -to IO_SCL
|
set_location_assignment PIN_U14 -to IO_SCL
|
||||||
set_location_assignment PIN_AG9 -to IO_SDA
|
set_location_assignment PIN_AG9 -to IO_SDA
|
||||||
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to IO_S*
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to IO_S*
|
||||||
@@ -163,7 +163,7 @@ set_instance_assignment -name FAST_OUTPUT_REGISTER ON -to HDMI_TX_D[*]
|
|||||||
set_instance_assignment -name FAST_OUTPUT_REGISTER ON -to HDMI_TX_DE
|
set_instance_assignment -name FAST_OUTPUT_REGISTER ON -to HDMI_TX_DE
|
||||||
set_instance_assignment -name FAST_OUTPUT_REGISTER ON -to HDMI_TX_HS
|
set_instance_assignment -name FAST_OUTPUT_REGISTER ON -to HDMI_TX_HS
|
||||||
set_instance_assignment -name FAST_OUTPUT_REGISTER ON -to HDMI_TX_VS
|
set_instance_assignment -name FAST_OUTPUT_REGISTER ON -to HDMI_TX_VS
|
||||||
set_instance_assignment -name FAST_OUTPUT_REGISTER ON -to HDMI_TX_CLK
|
#set_instance_assignment -name FAST_OUTPUT_REGISTER ON -to HDMI_TX_CLK
|
||||||
set_location_assignment PIN_U10 -to HDMI_I2C_SCL
|
set_location_assignment PIN_U10 -to HDMI_I2C_SCL
|
||||||
set_location_assignment PIN_AA4 -to HDMI_I2C_SDA
|
set_location_assignment PIN_AA4 -to HDMI_I2C_SDA
|
||||||
set_location_assignment PIN_T13 -to HDMI_I2S
|
set_location_assignment PIN_T13 -to HDMI_I2S
|
||||||
@@ -231,8 +231,6 @@ set_hps_location_assignment HPSINTERFACEPERIPHERALSPIMASTER_X52_Y72_N111 -to spi
|
|||||||
set_hps_location_assignment HPSINTERFACEPERIPHERALUART_X52_Y67_N111 -to uart
|
set_hps_location_assignment HPSINTERFACEPERIPHERALUART_X52_Y67_N111 -to uart
|
||||||
set_hps_location_assignment HPSINTERFACEPERIPHERALI2C_X52_Y60_N111 -to hdmi_i2c
|
set_hps_location_assignment HPSINTERFACEPERIPHERALI2C_X52_Y60_N111 -to hdmi_i2c
|
||||||
set_global_assignment -name PRE_FLOW_SCRIPT_FILE "quartus_sh:sys/build_id.tcl"
|
set_global_assignment -name PRE_FLOW_SCRIPT_FILE "quartus_sh:sys/build_id.tcl"
|
||||||
set_global_assignment -name CDF_FILE jtag.cdf
|
|
||||||
set_global_assignment -name QIP_FILE sys/sys.qip
|
|
||||||
source sys/sys_analog.tcl
|
source sys/sys_analog.tcl
|
||||||
set_location_assignment PIN_AF25 -to SDIO_DAT[0]
|
set_location_assignment PIN_AF25 -to SDIO_DAT[0]
|
||||||
set_location_assignment PIN_AF23 -to SDIO_DAT[1]
|
set_location_assignment PIN_AF23 -to SDIO_DAT[1]
|
||||||
@@ -283,6 +281,22 @@ set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to LED_*
|
|||||||
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to BTN_*
|
set_instance_assignment -name IO_STANDARD "3.3-V LVTTL" -to BTN_*
|
||||||
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to BTN_*
|
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to BTN_*
|
||||||
source files.qip
|
source files.qip
|
||||||
|
|
||||||
|
set_global_assignment -name ENABLE_SIGNALTAP OFF
|
||||||
|
set_global_assignment -name OPTIMIZATION_MODE "AGGRESSIVE PERFORMANCE"
|
||||||
|
set_global_assignment -name USE_SIGNALTAP_FILE Video_Explorer2.stp
|
||||||
|
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to USER_IO[2]
|
||||||
|
set_global_assignment -name PARTITION_NETLIST_TYPE SOURCE -section_id Top
|
||||||
|
set_global_assignment -name PARTITION_FITTER_PRESERVATION_LEVEL PLACEMENT_AND_ROUTING -section_id Top
|
||||||
|
set_global_assignment -name PARTITION_COLOR 16764057 -section_id Top
|
||||||
|
set_global_assignment -name CDF_FILE jtag.cdf
|
||||||
|
set_global_assignment -name QIP_FILE sys/sys.qip
|
||||||
|
set_global_assignment -name VERILOG_FILE rtl/Mister_Video_GIMEX.v
|
||||||
|
set_global_assignment -name VERILOG_FILE rtl/pll.v -library pll
|
||||||
|
set_global_assignment -name VERILOG_FILE rtl/pll/pll_0002.v -library pll
|
||||||
|
set_global_assignment -name SYSTEMVERILOG_FILE rtl/Cassette_Write.sv
|
||||||
|
set_global_assignment -name SYSTEMVERILOG_FILE rtl/config.sv
|
||||||
|
set_global_assignment -name SYSTEMVERILOG_FILE rtl/Auto_Run.sv
|
||||||
set_global_assignment -name VHDL_FILE rtl/sram/coco_ram.vhd
|
set_global_assignment -name VHDL_FILE rtl/sram/coco_ram.vhd
|
||||||
set_global_assignment -name VHDL_FILE rtl/rom/coco_rom_cart.vhd
|
set_global_assignment -name VHDL_FILE rtl/rom/coco_rom_cart.vhd
|
||||||
set_global_assignment -name VHDL_FILE rtl/rom/coco3_char_rom.vhd
|
set_global_assignment -name VHDL_FILE rtl/rom/coco3_char_rom.vhd
|
||||||
@@ -300,7 +314,6 @@ set_global_assignment -name VERILOG_FILE rtl/cassette.v
|
|||||||
set_global_assignment -name VERILOG_FILE rtl/rtc.sv
|
set_global_assignment -name VERILOG_FILE rtl/rtc.sv
|
||||||
set_global_assignment -name VERILOG_FILE rtl/AMW.v
|
set_global_assignment -name VERILOG_FILE rtl/AMW.v
|
||||||
set_global_assignment -name VERILOG_FILE rtl/square_gen.v
|
set_global_assignment -name VERILOG_FILE rtl/square_gen.v
|
||||||
set_global_assignment -name VERILOG_FILE rtl/config.v
|
|
||||||
set_global_assignment -name SYSTEMVERILOG_FILE rtl/fdc.sv
|
set_global_assignment -name SYSTEMVERILOG_FILE rtl/fdc.sv
|
||||||
set_global_assignment -name SYSTEMVERILOG_FILE rtl/sdc.sv
|
set_global_assignment -name SYSTEMVERILOG_FILE rtl/sdc.sv
|
||||||
set_global_assignment -name SYSTEMVERILOG_FILE rtl/sdc_top.sv
|
set_global_assignment -name SYSTEMVERILOG_FILE rtl/sdc_top.sv
|
||||||
@@ -315,135 +328,5 @@ set_global_assignment -name VHDL_FILE rtl/rom/coco_rom_32K.vhd
|
|||||||
set_global_assignment -name VHDL_FILE rtl/rom/coco_rom_8K.vhd
|
set_global_assignment -name VHDL_FILE rtl/rom/coco_rom_8K.vhd
|
||||||
set_global_assignment -name VHDL_FILE rtl/rom/coco_rom_16.vhd
|
set_global_assignment -name VHDL_FILE rtl/rom/coco_rom_16.vhd
|
||||||
set_global_assignment -name SDC_FILE rtl/CoCo3FPGA.sdc
|
set_global_assignment -name SDC_FILE rtl/CoCo3FPGA.sdc
|
||||||
|
|
||||||
set_global_assignment -name SIGNALTAP_FILE Video_Explorer.stp
|
|
||||||
set_global_assignment -name SIGNALTAP_FILE rom_Exploror.stp1
|
|
||||||
set_global_assignment -name SOURCE_FILE rom_Exploror.stp1
|
|
||||||
set_global_assignment -name SIGNALTAP_FILE Serial.stp
|
|
||||||
set_global_assignment -name SIGNALTAP_FILE AMW.stp
|
|
||||||
set_global_assignment -name SIGNALTAP_FILE HD.stp
|
|
||||||
set_global_assignment -name SIGNALTAP_FILE reset.stp
|
|
||||||
set_global_assignment -name SIGNALTAP_FILE Vsync.stp
|
|
||||||
set_global_assignment -name ENABLE_SIGNALTAP ON
|
|
||||||
set_global_assignment -name OPTIMIZATION_MODE "HIGH PERFORMANCE EFFORT"
|
|
||||||
set_global_assignment -name USE_SIGNALTAP_FILE Video_Explorer2.stp
|
|
||||||
set_global_assignment -name VERILOG_FILE rtl/mc6809glb/mc6809glb.v
|
set_global_assignment -name VERILOG_FILE rtl/mc6809glb/mc6809glb.v
|
||||||
set_global_assignment -name SIGNALTAP_FILE Video_Explorer2.stp
|
|
||||||
set_global_assignment -name SLD_NODE_CREATOR_ID 110 -section_id auto_signaltap_0
|
|
||||||
set_global_assignment -name SLD_NODE_ENTITY_NAME sld_signaltap -section_id auto_signaltap_0
|
|
||||||
set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_RAM_BLOCK_TYPE=AUTO" -section_id auto_signaltap_0
|
|
||||||
set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_NODE_INFO=805334528" -section_id auto_signaltap_0
|
|
||||||
set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_POWER_UP_TRIGGER=0" -section_id auto_signaltap_0
|
|
||||||
set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_STORAGE_QUALIFIER_INVERSION_MASK_LENGTH=0" -section_id auto_signaltap_0
|
|
||||||
set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_ATTRIBUTE_MEM_MODE=OFF" -section_id auto_signaltap_0
|
|
||||||
set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_STATE_FLOW_USE_GENERATED=0" -section_id auto_signaltap_0
|
|
||||||
set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_STATE_BITS=11" -section_id auto_signaltap_0
|
|
||||||
set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_BUFFER_FULL_STOP=1" -section_id auto_signaltap_0
|
|
||||||
set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_CURRENT_RESOURCE_WIDTH=1" -section_id auto_signaltap_0
|
|
||||||
set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_INCREMENTAL_ROUTING=1" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name POST_FIT_CONNECT_TO_SLD_NODE_ENTITY_PORT crc[0] -to auto_signaltap_0|gnd -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name POST_FIT_CONNECT_TO_SLD_NODE_ENTITY_PORT crc[3] -to auto_signaltap_0|gnd -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name POST_FIT_CONNECT_TO_SLD_NODE_ENTITY_PORT crc[5] -to auto_signaltap_0|vcc -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name POST_FIT_CONNECT_TO_SLD_NODE_ENTITY_PORT crc[16] -to auto_signaltap_0|vcc -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name POST_FIT_CONNECT_TO_SLD_NODE_ENTITY_PORT crc[28] -to auto_signaltap_0|vcc -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name POST_FIT_CONNECT_TO_SLD_NODE_ENTITY_PORT crc[31] -to auto_signaltap_0|gnd -section_id auto_signaltap_0
|
|
||||||
set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_TRIGGER_LEVEL=3" -section_id auto_signaltap_0
|
|
||||||
set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_TRIGGER_IN_ENABLED=0" -section_id auto_signaltap_0
|
|
||||||
set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_TRIGGER_PIPELINE=0" -section_id auto_signaltap_0
|
|
||||||
set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_COUNTER_PIPELINE=0" -section_id auto_signaltap_0
|
|
||||||
set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_ADVANCED_TRIGGER_ENTITY=basic,1,basic,1,basic,1," -section_id auto_signaltap_0
|
|
||||||
set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_TRIGGER_LEVEL_PIPELINE=1" -section_id auto_signaltap_0
|
|
||||||
set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_ENABLE_ADVANCED_TRIGGER=0" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name POST_FIT_CONNECT_TO_SLD_NODE_ENTITY_PORT crc[2] -to auto_signaltap_0|gnd -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name POST_FIT_CONNECT_TO_SLD_NODE_ENTITY_PORT crc[21] -to auto_signaltap_0|gnd -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name POST_FIT_CONNECT_TO_SLD_NODE_ENTITY_PORT crc[22] -to auto_signaltap_0|gnd -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name POST_FIT_CONNECT_TO_SLD_NODE_ENTITY_PORT crc[30] -to auto_signaltap_0|gnd -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_clk -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|clk_sample" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[0] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|CASS_REWIND_RECORD" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[0] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|CASS_REWIND_RECORD" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name POST_FIT_CONNECT_TO_SLD_NODE_ENTITY_PORT crc[6] -to auto_signaltap_0|vcc -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name POST_FIT_CONNECT_TO_SLD_NODE_ENTITY_PORT crc[12] -to auto_signaltap_0|gnd -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name POST_FIT_CONNECT_TO_SLD_NODE_ENTITY_PORT crc[17] -to auto_signaltap_0|gnd -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name POST_FIT_CONNECT_TO_SLD_NODE_ENTITY_PORT crc[18] -to auto_signaltap_0|gnd -section_id auto_signaltap_0
|
|
||||||
set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_RAM_PIPELINE=1" -section_id auto_signaltap_0
|
|
||||||
set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_SEGMENT_SIZE=2048" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name POST_FIT_CONNECT_TO_SLD_NODE_ENTITY_PORT crc[13] -to auto_signaltap_0|vcc -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name POST_FIT_CONNECT_TO_SLD_NODE_ENTITY_PORT crc[19] -to auto_signaltap_0|vcc -section_id auto_signaltap_0
|
|
||||||
set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_SAMPLE_DEPTH=2048" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name POST_FIT_CONNECT_TO_SLD_NODE_ENTITY_PORT crc[8] -to auto_signaltap_0|gnd -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name POST_FIT_CONNECT_TO_SLD_NODE_ENTITY_PORT crc[25] -to auto_signaltap_0|vcc -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[1] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|MOTOR_ON" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[2] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|blk_type[0]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[3] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|blk_type[1]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[4] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|blk_type[2]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[5] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|blk_type[3]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[6] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|blk_type[4]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[7] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|blk_type[5]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[8] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|blk_type[6]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[9] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|blk_type[7]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[10] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_address[0]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[11] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_address[1]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[12] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_address[2]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[13] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_address[3]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[14] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_address[4]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[15] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_address[5]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[16] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_address[6]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[17] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_address[7]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[18] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_address[8]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[19] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_data_in[0]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[20] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_data_in[1]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[21] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_data_in[2]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[22] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_data_in[3]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[23] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_data_in[4]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[24] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_data_in[5]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[25] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_data_in[6]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[26] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_data_in[7]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[27] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|look_for_sync" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[1] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|MOTOR_ON" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[2] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|blk_type[0]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[3] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|blk_type[1]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[4] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|blk_type[2]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[5] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|blk_type[3]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[6] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|blk_type[4]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[7] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|blk_type[5]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[8] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|blk_type[6]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[9] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|blk_type[7]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[10] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_address[0]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[11] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_address[1]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[12] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_address[2]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[13] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_address[3]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[14] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_address[4]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[15] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_address[5]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[16] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_address[6]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[17] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_address[7]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[18] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_address[8]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[19] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_data_in[0]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[20] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_data_in[1]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[21] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_data_in[2]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[22] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_data_in[3]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[23] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_data_in[4]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[24] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_data_in[5]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[25] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_data_in[6]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[26] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|buf_data_in[7]" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[27] -to "emu:emu|coco3fpga:coco3|Cassette_Write:CoCo3_Cassette_Write|look_for_sync" -section_id auto_signaltap_0
|
|
||||||
set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_DATA_BITS=28" -section_id auto_signaltap_0
|
|
||||||
set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_TRIGGER_BITS=28" -section_id auto_signaltap_0
|
|
||||||
set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_STORAGE_QUALIFIER_BITS=28" -section_id auto_signaltap_0
|
|
||||||
set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_INVERSION_MASK=0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000" -section_id auto_signaltap_0
|
|
||||||
set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_INVERSION_MASK_LENGTH=277" -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name POST_FIT_CONNECT_TO_SLD_NODE_ENTITY_PORT crc[1] -to auto_signaltap_0|gnd -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name POST_FIT_CONNECT_TO_SLD_NODE_ENTITY_PORT crc[4] -to auto_signaltap_0|vcc -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name POST_FIT_CONNECT_TO_SLD_NODE_ENTITY_PORT crc[7] -to auto_signaltap_0|vcc -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name POST_FIT_CONNECT_TO_SLD_NODE_ENTITY_PORT crc[9] -to auto_signaltap_0|vcc -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name POST_FIT_CONNECT_TO_SLD_NODE_ENTITY_PORT crc[10] -to auto_signaltap_0|vcc -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name POST_FIT_CONNECT_TO_SLD_NODE_ENTITY_PORT crc[11] -to auto_signaltap_0|gnd -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name POST_FIT_CONNECT_TO_SLD_NODE_ENTITY_PORT crc[14] -to auto_signaltap_0|gnd -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name POST_FIT_CONNECT_TO_SLD_NODE_ENTITY_PORT crc[15] -to auto_signaltap_0|vcc -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name POST_FIT_CONNECT_TO_SLD_NODE_ENTITY_PORT crc[20] -to auto_signaltap_0|vcc -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name POST_FIT_CONNECT_TO_SLD_NODE_ENTITY_PORT crc[23] -to auto_signaltap_0|vcc -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name POST_FIT_CONNECT_TO_SLD_NODE_ENTITY_PORT crc[24] -to auto_signaltap_0|vcc -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name POST_FIT_CONNECT_TO_SLD_NODE_ENTITY_PORT crc[26] -to auto_signaltap_0|gnd -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name POST_FIT_CONNECT_TO_SLD_NODE_ENTITY_PORT crc[27] -to auto_signaltap_0|vcc -section_id auto_signaltap_0
|
|
||||||
set_instance_assignment -name POST_FIT_CONNECT_TO_SLD_NODE_ENTITY_PORT crc[29] -to auto_signaltap_0|vcc -section_id auto_signaltap_0
|
|
||||||
set_global_assignment -name SLD_FILE db/Video_Explorer2_auto_stripped.stp
|
|
||||||
set_instance_assignment -name PARTITION_HIERARCHY root_partition -to | -section_id Top
|
set_instance_assignment -name PARTITION_HIERARCHY root_partition -to | -section_id Top
|
||||||
@@ -1,6 +1,6 @@
|
|||||||
//============================================================================
|
//============================================================================
|
||||||
// CoCo3 port to MiSTer
|
// CoCo3 port to MiSTer
|
||||||
// Copyright (c) 2019 Alan Steremberg - alanswx
|
// Copyright (c) 2019 Alan Steremberg - alanswx, Stan Hodge - MasterS3263827
|
||||||
//
|
//
|
||||||
//
|
//
|
||||||
//============================================================================
|
//============================================================================
|
||||||
@@ -189,6 +189,8 @@ assign VIDEO_ARY = (!ar) ? 12'd3 : 12'd0;
|
|||||||
|
|
||||||
|
|
||||||
`include "build_id.v"
|
`include "build_id.v"
|
||||||
|
`include "build_id_num.v"
|
||||||
|
|
||||||
localparam CONF_STR = {
|
localparam CONF_STR = {
|
||||||
"COCO3;UART19200:9600:4800:2400:1200:300;",
|
"COCO3;UART19200:9600:4800:2400:1200:300;",
|
||||||
"-;",
|
"-;",
|
||||||
@@ -252,7 +254,7 @@ localparam CONF_STR = {
|
|||||||
"J,Button1,Button2;",
|
"J,Button1,Button2;",
|
||||||
"jn,A,B;",
|
"jn,A,B;",
|
||||||
"v,51;",
|
"v,51;",
|
||||||
"V,v",`BUILD_DATE
|
"V,v",{`BUILD_DATE,"-",`BUILD_NUMBER}
|
||||||
};
|
};
|
||||||
|
|
||||||
// Status bits Directory
|
// Status bits Directory
|
||||||
@@ -277,7 +279,7 @@ assign clk_sys=CLK_57;
|
|||||||
wire pll_locked, pll2_locked;
|
wire pll_locked, pll2_locked;
|
||||||
wire CLK_114, CLK_57, CLK_28, CLK_14;
|
wire CLK_114, CLK_57, CLK_28, CLK_14;
|
||||||
|
|
||||||
|
assign VGA_DISABLE = 1'b0;
|
||||||
|
|
||||||
pll pll
|
pll pll
|
||||||
(
|
(
|
||||||
@@ -317,6 +319,7 @@ wire [21:0] gamma_bus;
|
|||||||
assign CLK_VIDEO = clk_sys;
|
assign CLK_VIDEO = clk_sys;
|
||||||
|
|
||||||
wire [64:0] RTC;
|
wire [64:0] RTC;
|
||||||
|
wire [15:0] sdram_sz;
|
||||||
|
|
||||||
// SD - 7 drives [4 fdc, 2 sdc and 1 cass_wr] 512 size blocks [the wd1793 translates to a 256 byte sector size]
|
// SD - 7 drives [4 fdc, 2 sdc and 1 cass_wr] 512 size blocks [the wd1793 translates to a 256 byte sector size]
|
||||||
hps_io #(.CONF_STR(CONF_STR),.PS2DIV(2400), .VDNUM(7), .BLKSZ(2)) hps_io
|
hps_io #(.CONF_STR(CONF_STR),.PS2DIV(2400), .VDNUM(7), .BLKSZ(2)) hps_io
|
||||||
@@ -342,6 +345,8 @@ hps_io #(.CONF_STR(CONF_STR),.PS2DIV(2400), .VDNUM(7), .BLKSZ(2)) hps_io
|
|||||||
.ioctl_dout(ioctl_data),
|
.ioctl_dout(ioctl_data),
|
||||||
.ioctl_index(ioctl_index),
|
.ioctl_index(ioctl_index),
|
||||||
|
|
||||||
|
.sdram_sz(sdram_sz),
|
||||||
|
|
||||||
// SD block level interface
|
// SD block level interface
|
||||||
|
|
||||||
.img_mounted(img_mounted), // signaling that new image has been mounted
|
.img_mounted(img_mounted), // signaling that new image has been mounted
|
||||||
@@ -455,7 +460,9 @@ wire Programmed_EE;
|
|||||||
|
|
||||||
EE_Cold_Bt COCO3_EE_Cold_Bt (
|
EE_Cold_Bt COCO3_EE_Cold_Bt (
|
||||||
.CLK(CLK_14),
|
.CLK(CLK_14),
|
||||||
|
.RESET(1'b0),
|
||||||
|
|
||||||
|
// .Display_EE(1'b0), // from MISTer subsystem
|
||||||
.Display_EE(easter_egg), // from MISTer subsystem
|
.Display_EE(easter_egg), // from MISTer subsystem
|
||||||
.Cold_Boot(AMW_ACK), // from AMW system
|
.Cold_Boot(AMW_ACK), // from AMW system
|
||||||
|
|
||||||
@@ -474,11 +481,15 @@ wire [7:0] r;
|
|||||||
wire [7:0] g;
|
wire [7:0] g;
|
||||||
wire [7:0] b;
|
wire [7:0] b;
|
||||||
|
|
||||||
wire easter_egg = ~status[10];
|
wire easter_egg = status[10];
|
||||||
wire [31:0] probe;
|
wire [31:0] probe;
|
||||||
|
|
||||||
assign USER_OUT[6:0] = probe[6:0];
|
assign USER_OUT[6:0] = probe[6:0];
|
||||||
|
|
||||||
|
wire [71:0] Config_Data;
|
||||||
|
|
||||||
|
assign Config_Data = {`BUILD_DATE, `BUILD_NUMBER};
|
||||||
|
|
||||||
coco3fpga coco3 (
|
coco3fpga coco3 (
|
||||||
// CLOCKS
|
// CLOCKS
|
||||||
|
|
||||||
@@ -522,7 +533,7 @@ coco3fpga coco3 (
|
|||||||
// R1, L2, R2, L1
|
// R1, L2, R2, L1
|
||||||
.P_SWITCH(~{coco_joy2[4],coco_joy1[5],coco_joy2[5],coco_joy1[4]}),
|
.P_SWITCH(~{coco_joy2[4],coco_joy1[5],coco_joy2[5],coco_joy1[4]}),
|
||||||
.SWITCH(switch),
|
.SWITCH(switch),
|
||||||
.SOUND_OUT(cocosound),
|
// .SOUND_OUT(cocosound),
|
||||||
.SOUND_LEFT(audio_left),
|
.SOUND_LEFT(audio_left),
|
||||||
.SOUND_RIGHT(AUDIO_R),
|
.SOUND_RIGHT(AUDIO_R),
|
||||||
|
|
||||||
@@ -533,6 +544,9 @@ coco3fpga coco3 (
|
|||||||
.ioctl_index(ioctl_index),
|
.ioctl_index(ioctl_index),
|
||||||
.ioctl_wr(ioctl_wr),
|
.ioctl_wr(ioctl_wr),
|
||||||
|
|
||||||
|
// SDRAM Info
|
||||||
|
.sdram_sz(sdram_sz),
|
||||||
|
|
||||||
// SD block level interface
|
// SD block level interface
|
||||||
|
|
||||||
.img_mounted(img_mounted), // signaling that new image has been mounted
|
.img_mounted(img_mounted), // signaling that new image has been mounted
|
||||||
@@ -580,6 +594,7 @@ coco3fpga coco3 (
|
|||||||
.RTC(RTC),
|
.RTC(RTC),
|
||||||
|
|
||||||
.AMW_Trigger(coldboot | mpi_reset | mem_reset),
|
.AMW_Trigger(coldboot | mpi_reset | mem_reset),
|
||||||
|
// .AMW_Trigger(coldboot),
|
||||||
.AMW_ACK(AMW_ACK),
|
.AMW_ACK(AMW_ACK),
|
||||||
|
|
||||||
.F_Turbo(F_Turbo),
|
.F_Turbo(F_Turbo),
|
||||||
@@ -587,6 +602,8 @@ coco3fpga coco3 (
|
|||||||
.Mem_Size(Mem_Size),
|
.Mem_Size(Mem_Size),
|
||||||
|
|
||||||
.AUTO_MODE(Auto_Mode),
|
.AUTO_MODE(Auto_Mode),
|
||||||
|
|
||||||
|
.Config_Data(Config_Data),
|
||||||
|
|
||||||
.UART_TXD(UART_TXD),
|
.UART_TXD(UART_TXD),
|
||||||
.UART_RXD(UART_RXD),
|
.UART_RXD(UART_RXD),
|
||||||
@@ -598,7 +615,7 @@ coco3fpga coco3 (
|
|||||||
|
|
||||||
assign status_set = 1'b0;
|
assign status_set = 1'b0;
|
||||||
|
|
||||||
wire [5:0] cocosound;
|
//wire [5:0] cocosound;
|
||||||
|
|
||||||
wire [2:0] turbo_speed = status[34:32];
|
wire [2:0] turbo_speed = status[34:32];
|
||||||
wire [2:0] assigned_turbo_speed;
|
wire [2:0] assigned_turbo_speed;
|
||||||
@@ -741,7 +758,7 @@ cassette cassette(
|
|||||||
|
|
||||||
.sdram_addr(ram_addr),
|
.sdram_addr(ram_addr),
|
||||||
.sdram_data(ram_data_o),
|
.sdram_data(ram_data_o),
|
||||||
.sdram_rd(ram_rd), // Not connected for sram
|
// .sdram_rd(ram_rd), // Not connected for sram
|
||||||
|
|
||||||
.data(casdout)
|
.data(casdout)
|
||||||
);
|
);
|
||||||
|
|||||||
+1
-1
@@ -277,7 +277,7 @@ trigger;]]>
|
|||||||
</storage_qualifier_level>
|
</storage_qualifier_level>
|
||||||
</storage_qualifier_events>
|
</storage_qualifier_events>
|
||||||
<log>
|
<log>
|
||||||
<data global_temp="1" name="log: Trig @ 2024/03/24 15:50:41 (0:0:14.0 elapsed)" power_up_mode="false" sample_depth="2048" trigger_position="256">11100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000011100101010101010111100000001110010101010101011110000000111001010101010101111000000000010101000111100011100000000001010100011110001110000000000101010001111000111000000000010101000111100011100000000001010100011110001110000000000101010001111000111000000000010101000111100011100000000001010100011110001110000000000101010001111000111000000000010101000111100011100000000001010100011110001110000000000101010001111000111000000000010101000111100011100000000001010100011110001110000000000101010001111000111000000000010101000111100011100000000001010100011110001110000000000101010001111000111000000000010101000111100011100000000001010100011110001110000000000101010001111000111000000000010101000111100011100000000001010100011110001110000000000101010001111000111000000000010101000111100011100000000001010100011110001110000000000101010001111000111000000000010101000111100011100000000001010100011110001110000000000101010001111000111000000000010101000111100011100000000001010100011110001110000000000101010001111000111000000000010101000111100011100000000001010100011110001110000000000101010001111000111000000000010101000111100011100000000001010100011110001110000000000101010001111000111000000000010101000111100011100000000001010100011110001110000000000101010001111000111000000000010101000111100011100000000001010100011110001110000000000101010001111000111000000000010101000111100011100000000001010100011110001110000000000101010001111000111000000000010101000111100011100000000001010100011110001110000000000101010001111000111000000000010101000111100011100000000001010100011110001110000000000101010001111000111000000000010101000111100011100000000001010100011110001110000000000101010001111000111000000000010101000111100011100000000001010100011110001110000000000101010001111000111000000000010101000111100011100000000001010100011110001110000000000101010001111000111000000000010101000111100011100000000001010100011110001110000000000101010001111000111000000000010101000111100011100000000001010100011110001110000000000101010001111000Line truncated
|
<data global_temp="1" name="log: Trig @ 2024/03/24 16:48:19 (0:0:12.7 elapsed)" power_up_mode="false" sample_depth="2048" trigger_position="256">11100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000101101001101010101111000000010110100110101010111100000001011010011010101011110000000011101001001111000111000000001110100100111100011100000000111010010011110001110000000011101001001111000111000000001110100100111100011100000000111010010011110001110000000011101001001111000111000000001110100100111100011100000000111010010011110001110000000011101001001111000111000000001110100100111100011100000000111010010011110001110000000011101001001111000111000000001110100100111100011100000000111010010011110001110000000011101001001111000111000000001110100100111100011100000000111010010011110001110000000011101001001111000111000000001110100100111100011100000000111010010011110001110000000011101001001111000111000000001110100100111100011100000000111010010011110001110000000011101001001111000111000000001110100100111100011100000000111010010011110001110000000011101001001111000111000000001110100100111100011100000000111010010011110001110000000011101001001111000111000000001110100100111100011100000000111010010011110001110000000011101001001111000111000000001110100100111100011100000000111010010011110001110000000011101001001111000111000000001110100100111100011100000000111010010011110001110000000011101001001111000111000000001110100100111100011100000000111010010011110001110000000011101001001111000111000000001110100100111100011100000000111010010011110001110000000011101001001111000111000000001110100100111100011100000000111010010011110001110000000011101001001111000111000000001110100100111100011100000000111010010011110001110000000011101001001111000111000000001110100100111100011100000000111010010011110001110000000011101001001111000111000000001110100100111100011100000000111010010011110001110000000011101001001111000111000000001110100100111100011100000000111010010011110001110000000011101001001111000111000000001110100100111100011100000000111010010011110001110000000011101001001111000111000000001110100100111100011100000000111010010011110001110000000011101001001111000111000000001110100100111100011100000000111010010011110001110000000011101001001111000Line truncated
|
||||||
<extradata>1111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111T111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111</extradata>
|
<extradata>1111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111T111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111</extradata>
|
||||||
</log>
|
</log>
|
||||||
</trigger>
|
</trigger>
|
||||||
|
|||||||
@@ -0,0 +1 @@
|
|||||||
|
`define BUILD_NUMBER "004"
|
||||||
+36
@@ -1,3 +1,39 @@
|
|||||||
|
1. Added support for cassette save. To use: A) You have to have a file [anyname.cas]
|
||||||
|
which is larger than needed. B) Select the file through the UI Menu 'Save
|
||||||
|
Cassette'. C)Set 'Cass Rwd=0 / Rec=1' to 1. D) Issue your 'CSAVE "NAME"'
|
||||||
|
E) When done, set 'Cass Rwd=0 / Rec=1' to 0 to complete the write. The file can
|
||||||
|
now be loaded or copied. Note a dummy file of a specific size can be created in
|
||||||
|
the MiSTer SSH shell in the /media/fat/games/coco3 with the command:
|
||||||
|
'truncate -s 65536 tapefileame.cas'. [Note do NOT use over 65536 file length]
|
||||||
|
2. Fixed serial interrupt [6551] to not be functional on slot 3 [carts].
|
||||||
|
3. Modification of sys_top.v to override use of USER_IO for HDMI - so it can be used
|
||||||
|
for logic analyzer debug. This will only occur when `define Config_Debug is
|
||||||
|
enabled in config.v.
|
||||||
|
4. Fixed MUGS of powerup issue occurring on some MiSTer units.
|
||||||
|
5. Fixed incorrect application of GIME_IRQ on legacy interrupts. Fixed race condition
|
||||||
|
on reading IRQ status vs clearing the interrupt.
|
||||||
|
6. Improved Castle of Tharoggad. App now loads but locks as the graphics animate. This
|
||||||
|
change improved mmu usage through to CARTS.
|
||||||
|
7. Builds now keep track of multiple builds in the same date. It shows as V240512-001 in
|
||||||
|
the menus. Its also exposed to BASIC and a boot.vhd which can be enabled to autorun is
|
||||||
|
supplied in the archive to show how it works.
|
||||||
|
8. Additionally, on the boot.vhd disk, is a program which demonstrated how to load a font -
|
||||||
|
IBMFONT.BAS. Run it and it maps a font much like the IBM font to the 80 column format.
|
||||||
|
Also, a file called TESTRTC.BAS pulls the MiSTer RTC values exposed in BASIC to display
|
||||||
|
a clock.
|
||||||
|
9. Large improvement in the Timer function. Code closer emulates COCO3 Timer. Fixes
|
||||||
|
Sliphead cart.
|
||||||
|
10. In the 20231023 release the wd1773 instances were reduced to 1 for the FDC and one for
|
||||||
|
the FDC. This saved space but introduced a bug when using multiple drives at the same
|
||||||
|
time - like a copy command. This change was removed and the copy command works again.
|
||||||
|
|
||||||
|
To Do...
|
||||||
|
1. Add Speech / Music cart
|
||||||
|
2. Fix Castle of Tharoggad
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
1. Changed PIA 2 addressing to align with real CoCo3 hardware and end at FF2F.
|
1. Changed PIA 2 addressing to align with real CoCo3 hardware and end at FF2F.
|
||||||
2. Re-arranged MiSTer drive LUNs to support future auto-boot from SDC drive 0.
|
2. Re-arranged MiSTer drive LUNs to support future auto-boot from SDC drive 0.
|
||||||
3. Added 'Auto Run' feature. You must use slot 2 [SDC]. Take your floppy or HD
|
3. Added 'Auto Run' feature. You must use slot 2 [SDC]. Take your floppy or HD
|
||||||
|
|||||||
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
@@ -21,7 +21,7 @@ set_global_assignment -name SYSTEMVERILOG_FILE rtl/Cassette_Write.sv
|
|||||||
set_global_assignment -name VERILOG_FILE rtl/rtc.sv
|
set_global_assignment -name VERILOG_FILE rtl/rtc.sv
|
||||||
set_global_assignment -name VERILOG_FILE rtl/AMW.v
|
set_global_assignment -name VERILOG_FILE rtl/AMW.v
|
||||||
set_global_assignment -name VERILOG_FILE rtl/square_gen.v
|
set_global_assignment -name VERILOG_FILE rtl/square_gen.v
|
||||||
set_global_assignment -name VERILOG_FILE rtl/config.v
|
set_global_assignment -name SYSTEMVERILOG_FILE rtl/config.sv
|
||||||
set_global_assignment -name SYSTEMVERILOG_FILE rtl/fdc.sv
|
set_global_assignment -name SYSTEMVERILOG_FILE rtl/fdc.sv
|
||||||
set_global_assignment -name SYSTEMVERILOG_FILE rtl/sdc.sv
|
set_global_assignment -name SYSTEMVERILOG_FILE rtl/sdc.sv
|
||||||
set_global_assignment -name SYSTEMVERILOG_FILE rtl/sdc_top.sv
|
set_global_assignment -name SYSTEMVERILOG_FILE rtl/sdc_top.sv
|
||||||
|
|||||||
Binary file not shown.
+51
-56
@@ -82,8 +82,6 @@ module Cassette_Write(
|
|||||||
|
|
||||||
);
|
);
|
||||||
|
|
||||||
assign sd_blk_cnt = 6'd0;
|
|
||||||
|
|
||||||
|
|
||||||
// Create 16x sample clock for the 2400 Baud rate...
|
// Create 16x sample clock for the 2400 Baud rate...
|
||||||
// ~26us based on 1.78Mhz [562 ns]- divide by 46....
|
// ~26us based on 1.78Mhz [562 ns]- divide by 46....
|
||||||
@@ -115,35 +113,38 @@ begin
|
|||||||
end
|
end
|
||||||
end
|
end
|
||||||
|
|
||||||
// Mounted SD Image [for the cass]
|
// Mounted SD Image [for the cass]
|
||||||
|
// This is not used and only here for completeness
|
||||||
|
|
||||||
reg drive_wp;
|
//reg drive_wp;
|
||||||
reg [31:0] drive_size;
|
//reg [31:0] drive_size;
|
||||||
|
|
||||||
always @(negedge img_mounted)
|
//always @(negedge img_mounted)
|
||||||
begin
|
//begin
|
||||||
drive_wp <= img_readonly;
|
// drive_wp <= img_readonly;
|
||||||
drive_size <= img_size[31:0]; //Size / 256 on [31:8]
|
// drive_size <= img_size[31:0]; //Size / 256 on [31:8]
|
||||||
end
|
//end
|
||||||
|
|
||||||
|
// Set to 1 512 byte block per r/w
|
||||||
|
assign sd_blk_cnt = 6'd0;
|
||||||
|
|
||||||
|
|
||||||
// Byte Receiver
|
// Byte Receiver
|
||||||
|
|
||||||
reg [15:0] incomming_reg;
|
reg [15:0] incomming_reg;
|
||||||
|
|
||||||
reg [5:0] bit_time;
|
reg [5:0] bit_time;
|
||||||
reg [2:0] bit_count;
|
reg [2:0] bit_count;
|
||||||
reg wave_negative;
|
reg wave_negative;
|
||||||
|
|
||||||
localparam time_out = 6'h3f;
|
localparam time_out = 6'h3f;
|
||||||
localparam wave_zero_level = 6'd32;
|
localparam wave_zero_level = 6'd32;
|
||||||
localparam bit_time_1 = 6'd22;
|
localparam bit_time_1 = 6'd22;
|
||||||
//localparam sync = 15'b010_1010_1001_1110; // Pre shift $553C
|
localparam sync = 15'b0111_1000_1010_101; // Pre shift $553C [L -> R]
|
||||||
localparam sync = 15'b0111_1000_1010_101; // Pre shift $553C [L -> R]
|
localparam sync_proper = 8'h3C;
|
||||||
localparam sync_proper = 8'h3C;
|
localparam leader = 8'h55;
|
||||||
localparam leader = 8'h55;
|
localparam pre_rollover = 9'h1FF;
|
||||||
localparam pre_rollover = 9'h1FF;
|
localparam rollover = 9'h000;
|
||||||
localparam rollover = 9'h000;
|
|
||||||
|
|
||||||
reg byte_clk;
|
reg byte_clk;
|
||||||
reg look_for_sync;
|
reg look_for_sync;
|
||||||
@@ -151,36 +152,37 @@ reg flush_end, flush_end_que;
|
|||||||
reg sd_hold;
|
reg sd_hold;
|
||||||
reg pre_roll;
|
reg pre_roll;
|
||||||
reg [7:0] blk_type;
|
reg [7:0] blk_type;
|
||||||
|
reg [7:0] protocol_data_count;
|
||||||
|
reg gap;
|
||||||
|
|
||||||
|
// Buffer interface
|
||||||
wire [8:0] buf_address;
|
wire [8:0] buf_address;
|
||||||
wire [7:0] buf_data_in;
|
wire [7:0] buf_data_in;
|
||||||
wire [7:0] buf_data_out;
|
wire [7:0] buf_data_out;
|
||||||
wire buf_write;
|
wire buf_write;
|
||||||
|
|
||||||
reg [7:0] protocol_data_count;
|
// State Mach states
|
||||||
|
localparam st_beg0 = 4'd0;
|
||||||
localparam st_beg0 = 4'd0;
|
localparam st_start = 4'd1;
|
||||||
localparam st_start = 4'd1;
|
localparam st_st1 = 4'd2;
|
||||||
localparam st_st1 = 4'd2;
|
localparam st_st2 = 4'd3;
|
||||||
localparam st_st2 = 4'd3;
|
localparam st_wr = 4'd4;
|
||||||
localparam st_st3 = 4'd4;
|
localparam st_wr1 = 4'd5;
|
||||||
localparam st_wr = 4'd5;
|
|
||||||
localparam st_wr1 = 4'd6;
|
|
||||||
|
|
||||||
reg [3:0] st_state;
|
reg [3:0] st_state;
|
||||||
reg [3:0] state_stack;
|
reg [3:0] state_stack;
|
||||||
|
|
||||||
localparam p_sync = 3'd0;
|
localparam p_sync = 3'd0;
|
||||||
localparam p_blk_type = 3'd1;
|
localparam p_blk_type = 3'd1;
|
||||||
localparam p_len = 3'd2;
|
localparam p_len = 3'd2;
|
||||||
localparam p_dta = 3'd3;
|
localparam p_dta = 3'd3;
|
||||||
localparam p_cksum = 3'd4;
|
localparam p_cksum = 3'd4;
|
||||||
|
|
||||||
reg [2:0] p_state;
|
reg [2:0] p_state;
|
||||||
|
|
||||||
localparam sd_wr_st = 2'd0;
|
localparam sd_wr_st = 2'd0;
|
||||||
localparam sd_wr_st1 = 2'd1;
|
localparam sd_wr_st1 = 2'd1;
|
||||||
localparam sd_wr_st2 = 2'd2;
|
localparam sd_wr_st2 = 2'd2;
|
||||||
|
|
||||||
reg [1:0] sd_wr_state;
|
reg [1:0] sd_wr_state;
|
||||||
|
|
||||||
@@ -210,6 +212,7 @@ begin
|
|||||||
sd_wr_state <= sd_wr_st;
|
sd_wr_state <= sd_wr_st;
|
||||||
sd_hold <= 1'b0;
|
sd_hold <= 1'b0;
|
||||||
pre_roll <= 1'b0;
|
pre_roll <= 1'b0;
|
||||||
|
gap <= 1'b0;
|
||||||
end
|
end
|
||||||
else
|
else
|
||||||
begin
|
begin
|
||||||
@@ -248,6 +251,7 @@ begin
|
|||||||
sd_wr_state <= sd_wr_st;
|
sd_wr_state <= sd_wr_st;
|
||||||
sd_hold <= 1'b0;
|
sd_hold <= 1'b0;
|
||||||
pre_roll <= 1'b0;
|
pre_roll <= 1'b0;
|
||||||
|
gap <= 1'b0;
|
||||||
end
|
end
|
||||||
|
|
||||||
byte_clk <= 1'b0;
|
byte_clk <= 1'b0;
|
||||||
@@ -265,7 +269,7 @@ begin
|
|||||||
if ((DTOA_CODE >= wave_zero_level) && wave_negative)
|
if ((DTOA_CODE >= wave_zero_level) && wave_negative)
|
||||||
begin
|
begin
|
||||||
// Initially we are not collecting the leader bytes just collecting them and
|
// Initially we are not collecting the leader bytes just collecting them and
|
||||||
// waiting for the sync $$553C. The write to file stage will automatically
|
// waiting for the sync $3C55. The write to file stage will automatically
|
||||||
// write the 128 leader bytes befor we start transfering data.
|
// write the 128 leader bytes befor we start transfering data.
|
||||||
if (!look_for_sync)
|
if (!look_for_sync)
|
||||||
begin
|
begin
|
||||||
@@ -301,7 +305,7 @@ begin
|
|||||||
begin
|
begin
|
||||||
buf_address <= 9'b000000000;
|
buf_address <= 9'b000000000;
|
||||||
buf_data_in <= leader;
|
buf_data_in <= leader;
|
||||||
protocol_data_count <= 8'h7f; // We will use this to count the 128 bytes
|
protocol_data_count <= 8'h80; // We will use this to count the 128 bytes
|
||||||
|
|
||||||
st_state <= st_start;
|
st_state <= st_start;
|
||||||
end
|
end
|
||||||
@@ -363,6 +367,8 @@ begin
|
|||||||
state_stack <= st_st1; // We come back here
|
state_stack <= st_st1; // We come back here
|
||||||
st_state <= st_wr; // Write a byte
|
st_state <= st_wr; // Write a byte
|
||||||
p_state <= p_dta;
|
p_state <= p_dta;
|
||||||
|
if ((blk_type == 8'h00) & (protocol_data_count == 8'h05) & (incomming_reg[15:8] == 8'hff))
|
||||||
|
gap <= 1'b1;
|
||||||
if (protocol_data_count == 8'h01)
|
if (protocol_data_count == 8'h01)
|
||||||
p_state <= p_cksum;
|
p_state <= p_cksum;
|
||||||
end
|
end
|
||||||
@@ -390,24 +396,13 @@ begin
|
|||||||
st_st2:
|
st_st2:
|
||||||
begin
|
begin
|
||||||
buf_data_in <= leader;
|
buf_data_in <= leader;
|
||||||
if (blk_type == 8'h00)
|
if ((blk_type == 8'h00) || gap)
|
||||||
protocol_data_count <= 8'h7f; // We will use this to count the 128 bytes
|
protocol_data_count <= 8'h80; // We will use this to count the 128 bytes
|
||||||
else
|
else
|
||||||
protocol_data_count <= 8'h01; // We will use this to count the 128 bytes
|
protocol_data_count <= 8'h02; // We will use this to count the 2 bytes
|
||||||
st_state <= st_start; // No, don't write any more - were done
|
st_state <= st_start; // No, don't write any more - were done
|
||||||
end
|
end
|
||||||
|
|
||||||
st_st3:
|
|
||||||
begin
|
|
||||||
state_stack <= st_st3; // We come back here
|
|
||||||
st_state <= st_wr; // Write a byte
|
|
||||||
protocol_data_count <= protocol_data_count - 1'b1;
|
|
||||||
if (protocol_data_count == 8'h00) // 128 bytes
|
|
||||||
begin
|
|
||||||
st_state <= st_st1; // No, don't write any more - were done
|
|
||||||
end
|
|
||||||
end
|
|
||||||
|
|
||||||
// Perform the byte writes to the buffer
|
// Perform the byte writes to the buffer
|
||||||
// This acts like a sub routine....
|
// This acts like a sub routine....
|
||||||
st_wr:
|
st_wr:
|
||||||
|
|||||||
@@ -5,6 +5,7 @@ create_clock -period 1000.000 -name img_mounted[2] [get_nodes emu:emu|hps_io:hps
|
|||||||
create_clock -period 1000.000 -name img_mounted[1] [get_nodes emu:emu|hps_io:hps_io|img_mounted[1]]
|
create_clock -period 1000.000 -name img_mounted[1] [get_nodes emu:emu|hps_io:hps_io|img_mounted[1]]
|
||||||
create_clock -period 1000.000 -name img_mounted[0] [get_nodes emu:emu|hps_io:hps_io|img_mounted[0]]
|
create_clock -period 1000.000 -name img_mounted[0] [get_nodes emu:emu|hps_io:hps_io|img_mounted[0]]
|
||||||
create_clock -period 1000.000 -name RESET_N [get_nodes emu:emu|coco3fpga:coco3|RESET_N]
|
create_clock -period 1000.000 -name RESET_N [get_nodes emu:emu|coco3fpga:coco3|RESET_N]
|
||||||
|
create_clock -period 1000.000 -name NMISample2 [get_nodes emu:emu|coco3fpga:coco3|mc6809x:GLBCPU09|NMISample2]
|
||||||
#set_false_path -from [get_nodes sysmem_lite:sysmem|sysmem_HPS_fpga_interfaces:fpga_interfaces|clocks_resets~FF_4365]
|
#set_false_path -from [get_nodes sysmem_lite:sysmem|sysmem_HPS_fpga_interfaces:fpga_interfaces|clocks_resets~FF_4365]
|
||||||
#create_clock -period 17.46 -name PH_2 [get_nodes emu:emu|coco3fpga:coco3|PH_2_RAW]
|
#create_clock -period 17.46 -name PH_2 [get_nodes emu:emu|coco3fpga:coco3|PH_2_RAW]
|
||||||
#create_clock -period 1000.000 -name CLK_6551[4] [get_nodes emu:emu|coco3fpga:coco3|CLK_6551[4]]
|
#create_clock -period 1000.000 -name CLK_6551[4] [get_nodes emu:emu|coco3fpga:coco3|CLK_6551[4]]
|
||||||
|
|||||||
+93
-80
@@ -55,6 +55,7 @@
|
|||||||
|
|
||||||
module EE_Cold_Bt(
|
module EE_Cold_Bt(
|
||||||
input CLK,
|
input CLK,
|
||||||
|
input RESET,
|
||||||
|
|
||||||
input Display_EE, // from MISTer subsystem
|
input Display_EE, // from MISTer subsystem
|
||||||
input Cold_Boot, // from MISTer subsystem
|
input Cold_Boot, // from MISTer subsystem
|
||||||
@@ -106,105 +107,117 @@ assign Start_Display_EE = ((Display_EE == 1'b1) & (Display_EE_D == 1'b0));
|
|||||||
assign Start_Cold_Boot = ((Cold_Boot == 1'b1) & (Cold_Boot_D == 1'b0));
|
assign Start_Cold_Boot = ((Cold_Boot == 1'b1) & (Cold_Boot_D == 1'b0));
|
||||||
|
|
||||||
|
|
||||||
always @(posedge CLK)
|
always @ (posedge CLK or posedge RESET)
|
||||||
begin
|
begin
|
||||||
|
if(RESET)
|
||||||
Display_EE_D <= Display_EE;
|
|
||||||
Cold_Boot_D <= Cold_Boot;
|
|
||||||
|
|
||||||
next_instruction <= 1'b0;
|
|
||||||
|
|
||||||
if (Start_Display_EE)
|
|
||||||
begin
|
begin
|
||||||
prog <= EE_PROG;
|
Display_EE_D <= 1'b0;
|
||||||
|
Cold_Boot_D <= 1'b0;
|
||||||
|
EE <= 1'b1;
|
||||||
|
N_RESET <= 1'b1;
|
||||||
|
prog <= 48'h000000000000;
|
||||||
|
next_instruction <= 1'b0;
|
||||||
|
timer <= 24'h000000;
|
||||||
end
|
end
|
||||||
|
else
|
||||||
if (Start_Cold_Boot)
|
|
||||||
begin
|
begin
|
||||||
prog <= Cold_Boot_PROG;
|
Display_EE_D <= Display_EE;
|
||||||
end
|
Cold_Boot_D <= Cold_Boot;
|
||||||
|
|
||||||
if (next_instruction)
|
next_instruction <= 1'b0;
|
||||||
prog[43:0] <= prog[47:4];
|
|
||||||
|
|
||||||
case(inst)
|
if (Start_Display_EE)
|
||||||
|
|
||||||
inst_NULL:;
|
|
||||||
|
|
||||||
inst_START:
|
|
||||||
begin
|
|
||||||
if (!next_instruction)
|
|
||||||
begin
|
begin
|
||||||
timer <= 24'h000000; // clear timer
|
prog <= EE_PROG;
|
||||||
next_instruction <= 1'b1;
|
|
||||||
end
|
end
|
||||||
end
|
|
||||||
|
|
||||||
inst_EE_ACTIVE:
|
if (Start_Cold_Boot)
|
||||||
begin
|
|
||||||
if (!next_instruction)
|
|
||||||
begin
|
begin
|
||||||
EE <= 1'b0;
|
prog <= Cold_Boot_PROG;
|
||||||
next_instruction <= 1'b1;
|
|
||||||
end
|
end
|
||||||
end
|
|
||||||
|
|
||||||
inst_EE_INACTIVE:
|
|
||||||
begin
|
|
||||||
if (!next_instruction)
|
|
||||||
begin
|
|
||||||
EE <= 1'b1;
|
|
||||||
next_instruction <= 1'b1;
|
|
||||||
end
|
|
||||||
end
|
|
||||||
|
|
||||||
inst_RESET_ACTIVE:
|
if (next_instruction)
|
||||||
begin
|
prog[43:0] <= prog[47:4];
|
||||||
if (!next_instruction)
|
|
||||||
begin
|
case(inst)
|
||||||
N_RESET <= 1'b0;
|
|
||||||
next_instruction <= 1'b1;
|
|
||||||
end
|
|
||||||
end
|
|
||||||
|
|
||||||
inst_RESET_INACTIVE:
|
inst_NULL:;
|
||||||
begin
|
|
||||||
if (!next_instruction)
|
inst_START:
|
||||||
begin
|
|
||||||
N_RESET <= 1'b1;
|
|
||||||
next_instruction <= 1'b1;
|
|
||||||
end
|
|
||||||
end
|
|
||||||
|
|
||||||
inst_SHORT_TIMER:
|
|
||||||
begin
|
|
||||||
if (!next_instruction)
|
|
||||||
begin
|
|
||||||
timer <= timer + 1'b1;
|
|
||||||
if (timer==SHORT_TIME)
|
|
||||||
begin
|
begin
|
||||||
next_instruction <= 1'b1;
|
if (!next_instruction)
|
||||||
timer <= 24'h000000; // clear timer
|
begin
|
||||||
|
timer <= 24'h000000; // clear timer
|
||||||
|
next_instruction <= 1'b1;
|
||||||
|
end
|
||||||
end
|
end
|
||||||
end
|
|
||||||
end
|
|
||||||
|
|
||||||
inst_LONG_TIMER:
|
inst_EE_ACTIVE:
|
||||||
begin
|
|
||||||
if (!next_instruction)
|
|
||||||
begin
|
|
||||||
timer <= timer + 1'b1;
|
|
||||||
if (timer==LONG_TIME)
|
|
||||||
begin
|
begin
|
||||||
next_instruction <= 1'b1;
|
if (!next_instruction)
|
||||||
timer <= 24'h000000; // clear timer
|
begin
|
||||||
|
EE <= 1'b0;
|
||||||
|
next_instruction <= 1'b1;
|
||||||
|
end
|
||||||
end
|
end
|
||||||
end
|
|
||||||
|
inst_EE_INACTIVE:
|
||||||
|
begin
|
||||||
|
if (!next_instruction)
|
||||||
|
begin
|
||||||
|
EE <= 1'b1;
|
||||||
|
next_instruction <= 1'b1;
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
inst_RESET_ACTIVE:
|
||||||
|
begin
|
||||||
|
if (!next_instruction)
|
||||||
|
begin
|
||||||
|
N_RESET <= 1'b0;
|
||||||
|
next_instruction <= 1'b1;
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
inst_RESET_INACTIVE:
|
||||||
|
begin
|
||||||
|
if (!next_instruction)
|
||||||
|
begin
|
||||||
|
N_RESET <= 1'b1;
|
||||||
|
next_instruction <= 1'b1;
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
inst_SHORT_TIMER:
|
||||||
|
begin
|
||||||
|
if (!next_instruction)
|
||||||
|
begin
|
||||||
|
timer <= timer + 1'b1;
|
||||||
|
if (timer==SHORT_TIME)
|
||||||
|
begin
|
||||||
|
next_instruction <= 1'b1;
|
||||||
|
timer <= 24'h000000; // clear timer
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
inst_LONG_TIMER:
|
||||||
|
begin
|
||||||
|
if (!next_instruction)
|
||||||
|
begin
|
||||||
|
timer <= timer + 1'b1;
|
||||||
|
if (timer==LONG_TIME)
|
||||||
|
begin
|
||||||
|
next_instruction <= 1'b1;
|
||||||
|
timer <= 24'h000000; // clear timer
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
default:;
|
||||||
|
|
||||||
|
endcase
|
||||||
end
|
end
|
||||||
|
|
||||||
default:;
|
|
||||||
|
|
||||||
endcase
|
|
||||||
end
|
end
|
||||||
|
|
||||||
endmodule
|
endmodule
|
||||||
+14
-4
@@ -1827,15 +1827,25 @@ always @ (negedge MASTER_CLK)
|
|||||||
// Adjust HSYNC here
|
// Adjust HSYNC here
|
||||||
**************************************************************************************/
|
**************************************************************************************/
|
||||||
// Width from 87 GIME 5.08 uS = 73 clocks
|
// Width from 87 GIME 5.08 uS = 73 clocks
|
||||||
11'd751: // 824 - 751 = 73 (approx 5.09 uS)
|
// 11'd751: // 824 - 751 = 73 (approx 5.09 uS)
|
||||||
|
// begin
|
||||||
|
// HSYNC_N <= 1'b0; // Turn on Sync
|
||||||
|
// PIXEL_COUNT <= 11'd752;
|
||||||
|
// end
|
||||||
|
// 11'd810: // End of SYNC start of front porch 804 + 80 - 1, End of Sync to Video = 167 816 + 167 =
|
||||||
|
// begin
|
||||||
|
// HSYNC_N <= 1'b1; // SYNC OFF
|
||||||
|
// PIXEL_COUNT <= 11'd811;
|
||||||
|
// end
|
||||||
|
11'd752: // 824 - 751 = 73 (approx 5.09 uS)
|
||||||
begin
|
begin
|
||||||
HSYNC_N <= 1'b0; // Turn on Sync
|
HSYNC_N <= 1'b0; // Turn on Sync
|
||||||
PIXEL_COUNT <= 11'd752;
|
PIXEL_COUNT <= 11'd753;
|
||||||
end
|
end
|
||||||
11'd810: // End of SYNC start of front porch 804 + 80 - 1, End of Sync to Video = 167 816 + 167 =
|
11'd811: // End of SYNC start of front porch 804 + 80 - 1, End of Sync to Video = 167 816 + 167 =
|
||||||
begin
|
begin
|
||||||
HSYNC_N <= 1'b1; // SYNC OFF
|
HSYNC_N <= 1'b1; // SYNC OFF
|
||||||
PIXEL_COUNT <= 11'd811;
|
PIXEL_COUNT <= 11'd812;
|
||||||
end
|
end
|
||||||
/**************************************************************************************
|
/**************************************************************************************
|
||||||
* End of HSYNC adjustment
|
* End of HSYNC adjustment
|
||||||
|
|||||||
+11
-11
@@ -6,16 +6,16 @@ module cassette(
|
|||||||
input rewind,
|
input rewind,
|
||||||
input en,
|
input en,
|
||||||
|
|
||||||
output reg [24:0] sdram_addr,
|
output reg [15:0] sdram_addr,
|
||||||
input [7:0] sdram_data,
|
input [7:0] sdram_data,
|
||||||
output reg sdram_rd,
|
// output reg sdram_rd,
|
||||||
|
|
||||||
output data,
|
output data
|
||||||
output [2:0] status
|
// output [2:0] status
|
||||||
|
|
||||||
);
|
);
|
||||||
|
|
||||||
assign status = state;
|
//assign status = state;
|
||||||
|
|
||||||
reg old_en;
|
reg old_en;
|
||||||
reg ffrewind;
|
reg ffrewind;
|
||||||
@@ -60,25 +60,25 @@ always @(posedge clk) begin
|
|||||||
end
|
end
|
||||||
NEXT: begin
|
NEXT: begin
|
||||||
state <= READ1;
|
state <= READ1;
|
||||||
sdram_rd <= 1'b0;
|
// sdram_rd <= 1'b0;
|
||||||
if (seq == 24'h553c00) name <= 1'd1;
|
if (seq == 24'h553c00) name <= 1'd1;
|
||||||
if (seq == 24'h555555 && name) begin
|
if (seq == 24'h555555 && name) begin
|
||||||
name <= 1'd0;
|
name <= 1'd0;
|
||||||
state <= WAIT;
|
state <= WAIT;
|
||||||
hold <= 19'd445000; // 0.5s
|
hold <= 19'd445000; // 0.5s
|
||||||
sdram_addr <= sdram_addr - 25'd3;
|
sdram_addr <= sdram_addr - 16'd3;
|
||||||
end
|
end
|
||||||
if (seq == 24'h553cff) eof <= 2'd1;
|
if (seq == 24'h553cff) eof <= 2'd1;
|
||||||
if (seq == 24'h00ff55 && eof == 2'd1) eof <= 2'd2;
|
if (seq == 24'h00ff55 && eof == 2'd1) eof <= 2'd2;
|
||||||
if (~en) state <= IDLE;
|
if (~en) state <= IDLE;
|
||||||
end
|
end
|
||||||
READ1: begin
|
READ1: begin
|
||||||
sdram_rd <= 1'b1;
|
// sdram_rd <= 1'b1;
|
||||||
state <= READ2;
|
state <= READ2;
|
||||||
end
|
end
|
||||||
READ2: begin
|
READ2: begin
|
||||||
ibyte <= sdram_data;
|
ibyte <= sdram_data;
|
||||||
sdram_rd <= 1'b0;
|
// sdram_rd <= 1'b0;
|
||||||
state <= READ3;
|
state <= READ3;
|
||||||
sq_start <= 1'b1;
|
sq_start <= 1'b1;
|
||||||
end
|
end
|
||||||
@@ -88,14 +88,14 @@ always @(posedge clk) begin
|
|||||||
end
|
end
|
||||||
READ4: begin
|
READ4: begin
|
||||||
seq <= { seq[15:0], sdram_data };
|
seq <= { seq[15:0], sdram_data };
|
||||||
sdram_addr <= sdram_addr + 25'd1;
|
sdram_addr <= sdram_addr + 16'd1;
|
||||||
state <= eof == 2'd2 ? IDLE : NEXT;
|
state <= eof == 2'd2 ? IDLE : NEXT;
|
||||||
end
|
end
|
||||||
endcase
|
endcase
|
||||||
|
|
||||||
if (ffrewind ^ rewind) begin
|
if (ffrewind ^ rewind) begin
|
||||||
seq <= 24'd0;
|
seq <= 24'd0;
|
||||||
sdram_addr <= 25'd0;
|
sdram_addr <= 16'd0;
|
||||||
state <= IDLE;
|
state <= IDLE;
|
||||||
eof <= 2'd0;
|
eof <= 2'd0;
|
||||||
end
|
end
|
||||||
|
|||||||
+451
-250
File diff suppressed because it is too large.
Load diff
@@ -61,23 +61,47 @@
|
|||||||
// This file is a configuration definition file. The CoCo3FPGA for MiSTer source files
|
// This file is a configuration definition file. The CoCo3FPGA for MiSTer source files
|
||||||
// can be built into multiple objects which have mutually exclusive features.
|
// can be built into multiple objects which have mutually exclusive features.
|
||||||
|
|
||||||
`include "../RTL/config_inc.v"
|
`define Config_Debug_FLAG 4'hA
|
||||||
|
localparam [7:0] FEATURE_1 = 8'h01;
|
||||||
|
localparam [7:0] FEATURE_2 = 8'h02;
|
||||||
|
localparam [7:0] FEATURE_3 = 8'h04;
|
||||||
|
localparam [7:0] FEATURE_4 = 8'h08;
|
||||||
|
localparam [7:0] FEATURE_5 = 8'h10;
|
||||||
|
localparam [7:0] FEATURE_6 = 8'h20;
|
||||||
|
localparam [7:0] FEATURE_7 = 8'h40;
|
||||||
|
localparam [7:0] FEATURE_8 = 8'h80;
|
||||||
|
|
||||||
// If defined the Config_Debug sets the FEATURE MASKS all OR'd together which appears on COCO space at FFF1 & (FFF0 = 0x55 as a debug flag)
|
// This is used for hardware debugging - it overrides the USER_IO to be user_out direct.
|
||||||
//`define Config_Debug
|
// It should be commented out for release
|
||||||
|
//`define Config_Debug
|
||||||
|
|
||||||
// Feature list - note only FEATURE_1 - FEATURE_8 are supported
|
// Feature list - note only FEATURE_1 - FEATURE_8 are supported
|
||||||
///////////////////////////////////////////////////////////////////////////////////////////////////////////
|
///////////////////////////////////////////////////////////////////////////////////////////////////////////
|
||||||
`set_feature(CoCo3_Horz_INT_FIX, FEATURE_1) // Connection of the horz int to the Mister CoCo3 V5 rasterizer
|
// `set_feature(CoCo3_Horz_INT_FIX,Feat_1) // Connection of the horz int to the Mister CoCo3 V5 rasterizer
|
||||||
|
`define CoCo3_Horz_INT_FIX
|
||||||
|
`define Feat_1
|
||||||
|
|
||||||
//`set_feature(CoCo3_Vert_INT_FIX, FEATURE_2) // Connection of the vert int to the Mister CoCo3 V5 rasterizer
|
// `set_feature(CoCo3_Vert_INT_FIX,Feat_2) // Connection of the vert int to the Mister CoCo3 V5 rasterizer
|
||||||
|
// `define CoCo3_Vert_INT_FIX
|
||||||
|
// `define Feat_2
|
||||||
|
|
||||||
`set_feature(CoCo3_CYC_ACC_6809, FEATURE_3) // Use cycle accurate 6809
|
// `set_feature(CoCo3_CYC_ACC_6809,Feat_3) // Use cycle accurate 6809
|
||||||
|
`define CoCo3_CYC_ACC_6809
|
||||||
|
`define Feat_3
|
||||||
|
|
||||||
`set_feature(CoCo3_sdc_override_size, FEATURE_4) // Define static size value
|
// `set_feature(CoCo3_sdc_override_size,Feat_4) // Define static size value
|
||||||
|
`define CoCo3_sdc_override_size
|
||||||
|
`define Feat_4
|
||||||
|
|
||||||
`set_feature(CoCo3_sdc_fix_os9_driver, FEATURE_5) // fix sdc query disk size issue in llcocosdc driver in multipak enviroment
|
// `set_feature(CoCo3_sdc_fix_os9_driver,Feat_5) // fix sdc query disk size issue in llcocosdc driver in multipak enviroment
|
||||||
|
`define CoCo3_sdc_fix_os9_driver
|
||||||
|
`define Feat_5
|
||||||
|
|
||||||
`set_feature(CoCo3_disable_GART_in_GIMEX, FEATURE_6)// Disable GIMEX ram transfers [GIMEX detection in OS( EOU]
|
// `set_feature(CoCo3_disable_GART_in_GIMEX,Feat_6) // Disable GIMEX ram transfers [GIMEX detection in OS9 EOU]
|
||||||
|
`define CoCo3_disable_GART_in_GIMEX
|
||||||
|
`define Feat_6
|
||||||
|
|
||||||
|
// `set_feature(CoCo3_Select_GIMEX_RAST,Feat_7) // Use GIMEX Rasterizer Engine
|
||||||
|
// `define CoCo3_Select_GIMEX_RAST
|
||||||
|
// `define Feat_7
|
||||||
|
|
||||||
//`set_feature(CoCo3_Select_GIMEX_RAST, FEATURE_7) // Use GIMEX Rasterizer Engine
|
|
||||||
@@ -1,123 +0,0 @@
|
|||||||
////////////////////////////////////////////////////////////////////////////////
|
|
||||||
// Project Name: CoCo3FPGA Version 5.x.x
|
|
||||||
// File Name: config_inc.v
|
|
||||||
//
|
|
||||||
// CoCo3 in an FPGA
|
|
||||||
//
|
|
||||||
////////////////////////////////////////////////////////////////////////////////
|
|
||||||
//
|
|
||||||
// CPU section copyrighted by John Kent
|
|
||||||
//
|
|
||||||
////////////////////////////////////////////////////////////////////////////////
|
|
||||||
//
|
|
||||||
// Color Computer 3 compatible system on a chip
|
|
||||||
//
|
|
||||||
// Version : 5.x
|
|
||||||
//
|
|
||||||
// Copyright (c) 2008 Gary Becker ([email protected])
|
|
||||||
//
|
|
||||||
// All rights reserved
|
|
||||||
//
|
|
||||||
// Redistribution and use in source and synthezised forms, with or without
|
|
||||||
// modification, are permitted provided that the following conditions are met:
|
|
||||||
//
|
|
||||||
// Redistributions of source code must retain the above copyright notice,
|
|
||||||
// this list of conditions and the following disclaimer.
|
|
||||||
//
|
|
||||||
// Redistributions in synthesized form must reproduce the above copyright
|
|
||||||
// notice, this list of conditions and the following disclaimer in the
|
|
||||||
// documentation and/or other materials provided with the distribution.
|
|
||||||
//
|
|
||||||
// Neither the name of the author nor the names of other contributors may
|
|
||||||
// be used to endorse or promote products derived from this software without
|
|
||||||
// specific prior written permission.
|
|
||||||
//
|
|
||||||
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
||||||
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
|
|
||||||
// THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
||||||
// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
|
|
||||||
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
||||||
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
||||||
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
||||||
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
||||||
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
||||||
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
||||||
// POSSIBILITY OF SUCH DAMAGE.
|
|
||||||
//
|
|
||||||
// Please report bugs to the author, but before you do so, please
|
|
||||||
// make sure that this is not a derivative work and that
|
|
||||||
// you have the latest version of this file.
|
|
||||||
//
|
|
||||||
////////////////////////////////////////////////////////////////////////////////
|
|
||||||
// Gary Becker
|
|
||||||
// [email protected]
|
|
||||||
////////////////////////////////////////////////////////////////////////////////
|
|
||||||
////////////////////////////////////////////////////////////////////////////////
|
|
||||||
// MISTer Conversion by Stan Hodge and Alan Steremberg (& Gary Becker)
|
|
||||||
// [email protected]
|
|
||||||
//
|
|
||||||
////////////////////////////////////////////////////////////////////////////////
|
|
||||||
|
|
||||||
// This file is a configuration definition include file. The CoCo3FPGA for MiSTer source files
|
|
||||||
// can be built into multiple objects which have mutually exclusive features.
|
|
||||||
|
|
||||||
`define Config_Debug_Value (`config_num_1 | `config_num_2 | `config_num_3 | `config_num_4 | `config_num_5 | `config_num_6 | `config_num_7 | `config_num_8)
|
|
||||||
`define Config_Debug_FLAG 8'h55
|
|
||||||
`define FEATURE_1 8'h01
|
|
||||||
`define FEATURE_2 8'h02
|
|
||||||
`define FEATURE_3 8'h04
|
|
||||||
`define FEATURE_4 8'h08
|
|
||||||
`define FEATURE_5 8'h10
|
|
||||||
`define FEATURE_6 8'h20
|
|
||||||
`define FEATURE_7 8'h40
|
|
||||||
`define FEATURE_8 8'h80
|
|
||||||
`define config_num_1 8'h00
|
|
||||||
`define config_num_2 8'h00
|
|
||||||
`define config_num_3 8'h00
|
|
||||||
`define config_num_4 8'h00
|
|
||||||
`define config_num_5 8'h00
|
|
||||||
`define config_num_6 8'h00
|
|
||||||
`define config_num_7 8'h00
|
|
||||||
`define config_num_8 8'h00
|
|
||||||
|
|
||||||
`define set_feature(Feat_Name, Feat_Mask) \
|
|
||||||
`define Feat_Name \
|
|
||||||
`ifndef config_value_1 \
|
|
||||||
`define config_value_1 Feat_Mask \
|
|
||||||
`define config_num_1 Feat_Mask \
|
|
||||||
`else \
|
|
||||||
`ifndef config_value_2 \
|
|
||||||
`define config_value_2 Feat_Mask \
|
|
||||||
`define config_num_2 Feat_Mask \
|
|
||||||
`else \
|
|
||||||
`ifndef config_value_3 \
|
|
||||||
`define config_value_3 Feat_Mask \
|
|
||||||
`define config_num_3 Feat_Mask \
|
|
||||||
`else \
|
|
||||||
`ifndef config_value_4 \
|
|
||||||
`define config_value_4 Feat_Mask \
|
|
||||||
`define config_num_4 Feat_Mask \
|
|
||||||
`else \
|
|
||||||
`ifndef config_value_5 \
|
|
||||||
`define config_value_5 Feat_Mask \
|
|
||||||
`define config_num_5 Feat_Mask \
|
|
||||||
`else \
|
|
||||||
`ifndef config_value_6 \
|
|
||||||
`define config_value_6 Feat_Mask \
|
|
||||||
`define config_num_6 Feat_Mask \
|
|
||||||
`else \
|
|
||||||
`ifndef config_value_7 \
|
|
||||||
`define config_value_7 Feat_Mask \
|
|
||||||
`define config_num_7 Feat_Mask \
|
|
||||||
`else \
|
|
||||||
`ifndef config_value_8 \
|
|
||||||
`define config_value_8 Feat_Mask \
|
|
||||||
`define config_num_8 Feat_Mask \
|
|
||||||
`endif \
|
|
||||||
`endif \
|
|
||||||
`endif \
|
|
||||||
`endif \
|
|
||||||
`endif \
|
|
||||||
`endif \
|
|
||||||
`endif \
|
|
||||||
`endif
|
|
||||||
+213
-89
@@ -135,6 +135,10 @@ wire [3:0] DRIVE_SEL_EXT_PRE = {DATA_IN[6], DATA_IN[2:0]};
|
|||||||
reg [2:0] drive_index;
|
reg [2:0] drive_index;
|
||||||
|
|
||||||
// SD blk system is a array of 4 systems - one for each drive.
|
// SD blk system is a array of 4 systems - one for each drive.
|
||||||
|
// To keep disk track memory, we created 4 wd1793's to match the sd block interfaces
|
||||||
|
// For the interface back to the coco - we need to isolate the wd1793 the computer is talking
|
||||||
|
// to and route those feedback signals back to the coco. This is accomplished via the drive
|
||||||
|
// select. 'drive_index' identifies which controller is addressd.
|
||||||
|
|
||||||
|
|
||||||
always @(negedge FF40_CLK or negedge RESET_N)
|
always @(negedge FF40_CLK or negedge RESET_N)
|
||||||
@@ -178,7 +182,7 @@ begin
|
|||||||
4'b1001:
|
4'b1001:
|
||||||
drive_index <= 3'd1;
|
drive_index <= 3'd1;
|
||||||
default:
|
default:
|
||||||
drive_index <= 3'd0; // Illegal
|
drive_index <= 3'd1; // Illegal
|
||||||
endcase
|
endcase
|
||||||
end
|
end
|
||||||
end
|
end
|
||||||
@@ -208,12 +212,13 @@ wire DRQ[4];
|
|||||||
wire selected_DRQ;
|
wire selected_DRQ;
|
||||||
wire selected_INTRQ;
|
wire selected_INTRQ;
|
||||||
|
|
||||||
wire WR;
|
wire WR[4];
|
||||||
wire RD;
|
wire RD[4];
|
||||||
wire RD_E;
|
wire RD_E[4];
|
||||||
//wire CE;
|
//wire CE;
|
||||||
wire HALT_EN_RST;
|
wire HALT_EN_RST;
|
||||||
wire [7:0] DATA_1793;
|
wire [7:0] DATA_1793;
|
||||||
|
wire [7:0] dout[4];
|
||||||
reg read;
|
reg read;
|
||||||
reg write;
|
reg write;
|
||||||
reg read_d;
|
reg read_d;
|
||||||
@@ -225,7 +230,11 @@ reg read1;
|
|||||||
reg write1;
|
reg write1;
|
||||||
reg [1:0] ADDRESS_L;
|
reg [1:0] ADDRESS_L;
|
||||||
|
|
||||||
assign RD = read || RD_E;
|
|
||||||
|
assign RD[0] = (read || RD_E[0]) && (drive_index == 2'd1);
|
||||||
|
assign RD[1] = (read || RD_E[1]) && (drive_index == 3'd2);
|
||||||
|
assign RD[2] = (read || RD_E[2]) && (drive_index == 3'd3);
|
||||||
|
assign RD[3] = (read || RD_E[3]) && (drive_index == 3'd4);
|
||||||
|
|
||||||
// The idea here is to "stretch" the CPU read and write signals to ensure we catch a 8 mhz enable.
|
// The idea here is to "stretch" the CPU read and write signals to ensure we catch a 8 mhz enable.
|
||||||
// For writes we will buffer the data out to ensure it does not go away.
|
// For writes we will buffer the data out to ensure it does not go away.
|
||||||
@@ -244,8 +253,14 @@ begin
|
|||||||
write_d <= 1'b0;
|
write_d <= 1'b0;
|
||||||
r_w_active <= 1'b0;
|
r_w_active <= 1'b0;
|
||||||
clk_8Mhz_enable_found <= 1'b0;
|
clk_8Mhz_enable_found <= 1'b0;
|
||||||
WR <= 1'b0;
|
WR[0] <= 1'b0;
|
||||||
RD_E <= 1'b0;
|
WR[1] <= 1'b0;
|
||||||
|
WR[2] <= 1'b0;
|
||||||
|
WR[3] <= 1'b0;
|
||||||
|
RD_E[0] <= 1'b0;
|
||||||
|
RD_E[1] <= 1'b0;
|
||||||
|
RD_E[2] <= 1'b0;
|
||||||
|
RD_E[3] <= 1'b0;
|
||||||
read1 <= 1'b0;
|
read1 <= 1'b0;
|
||||||
write1 <= 1'b0;
|
write1 <= 1'b0;
|
||||||
read <= 1'b0;
|
read <= 1'b0;
|
||||||
@@ -278,14 +293,32 @@ begin
|
|||||||
begin
|
begin
|
||||||
// Set Writes
|
// Set Writes
|
||||||
r_w_active <= 1'b1;
|
r_w_active <= 1'b1;
|
||||||
WR <= 1'b1;
|
case (drive_index)
|
||||||
|
3'd1:
|
||||||
|
WR[0] <= 1'b1;
|
||||||
|
3'd2:
|
||||||
|
WR[1] <= 1'b1;
|
||||||
|
3'd3:
|
||||||
|
WR[2] <= 1'b1;
|
||||||
|
3'd4:
|
||||||
|
WR[3] <= 1'b1;
|
||||||
|
endcase
|
||||||
end
|
end
|
||||||
|
|
||||||
// Synchronus rising edge of read
|
// Synchronus rising edge of read
|
||||||
if ((read == 1'b1) && (read_d == 1'b0))
|
if ((read == 1'b1) && (read_d == 1'b0))
|
||||||
begin
|
begin
|
||||||
r_w_active <= 1'b1;
|
r_w_active <= 1'b1;
|
||||||
RD_E <= 1'b1;
|
case (drive_index)
|
||||||
|
3'd1:
|
||||||
|
RD_E[0] <= 1'b1;
|
||||||
|
3'd2:
|
||||||
|
RD_E[1] <= 1'b1;
|
||||||
|
3'd3:
|
||||||
|
RD_E[2] <= 1'b1;
|
||||||
|
3'd4:
|
||||||
|
RD_E[3] <= 1'b1;
|
||||||
|
endcase
|
||||||
end
|
end
|
||||||
|
|
||||||
// Clears
|
// Clears
|
||||||
@@ -298,54 +331,48 @@ begin
|
|||||||
clk_8Mhz_enable_found <= 1'b0;
|
clk_8Mhz_enable_found <= 1'b0;
|
||||||
r_w_active <= 1'b0;
|
r_w_active <= 1'b0;
|
||||||
|
|
||||||
WR <= 1'b0;
|
WR[0] <= 1'b0;
|
||||||
|
WR[1] <= 1'b0;
|
||||||
|
WR[2] <= 1'b0;
|
||||||
|
WR[3] <= 1'b0;
|
||||||
|
|
||||||
RD_E <= 1'b0;
|
RD_E[0] <= 1'b0;
|
||||||
|
RD_E[1] <= 1'b0;
|
||||||
|
RD_E[2] <= 1'b0;
|
||||||
|
RD_E[3] <= 1'b0;
|
||||||
end
|
end
|
||||||
end
|
end
|
||||||
end
|
end
|
||||||
|
|
||||||
|
// NMI from disk controller
|
||||||
|
// Selected INTRQ
|
||||||
|
assign selected_INTRQ = (drive_index == 3'd1) ? INTRQ[0]:
|
||||||
|
(drive_index == 3'd2) ? INTRQ[1]:
|
||||||
|
(drive_index == 3'd3) ? INTRQ[2]:
|
||||||
|
(drive_index == 3'd4) ? INTRQ[3]:
|
||||||
|
1'b0;
|
||||||
|
|
||||||
assign NMI_09 = DENSITY & selected_INTRQ; // Send NMI if Double Density (Halt Mode)
|
assign NMI_09 = DENSITY & selected_INTRQ; // Send NMI if Double Density (Halt Mode)
|
||||||
|
|
||||||
|
// HALT from disk controller
|
||||||
|
// Selected DRQ
|
||||||
|
assign selected_DRQ = (drive_index == 3'd1) ? DRQ[0]:
|
||||||
|
(drive_index == 3'd2) ? DRQ[1]:
|
||||||
|
(drive_index == 3'd3) ? DRQ[2]:
|
||||||
|
(drive_index == 3'd4) ? DRQ[3]:
|
||||||
|
1'b1;
|
||||||
|
|
||||||
|
|
||||||
assign HALT = (HALT_EN & ~selected_DRQ);
|
assign HALT = (HALT_EN & ~selected_DRQ);
|
||||||
|
|
||||||
assign HALT_EN_RST = RESET_N & ~selected_INTRQ; // From controller schematic
|
assign HALT_EN_RST = RESET_N & ~selected_INTRQ; // From controller schematic
|
||||||
|
|
||||||
assign sd_lba[0] = wd1793_sd_lba;
|
// Data bus selection
|
||||||
assign sd_lba[1] = wd1793_sd_lba;
|
assign DATA_1793 = (drive_index == 3'd1) ? dout[0]:
|
||||||
assign sd_lba[2] = wd1793_sd_lba;
|
(drive_index == 3'd2) ? dout[1]:
|
||||||
assign sd_lba[3] = wd1793_sd_lba;
|
(drive_index == 3'd3) ? dout[2]:
|
||||||
|
(drive_index == 3'd4) ? dout[3]:
|
||||||
assign sd_rd[0] = (drive_index == 3'd1) ? wd1793_sd_rd:
|
8'd0;
|
||||||
1'b0;
|
|
||||||
assign sd_rd[1] = (drive_index == 3'd2) ? wd1793_sd_rd:
|
|
||||||
1'b0;
|
|
||||||
assign sd_rd[2] = (drive_index == 3'd3) ? wd1793_sd_rd:
|
|
||||||
1'b0;
|
|
||||||
assign sd_rd[3] = (drive_index == 3'd4) ? wd1793_sd_rd:
|
|
||||||
1'b0;
|
|
||||||
|
|
||||||
assign sd_wr[0] = (drive_index == 3'd1) ? wd1793_sd_wr:
|
|
||||||
1'b0;
|
|
||||||
assign sd_wr[1] = (drive_index == 3'd2) ? wd1793_sd_wr:
|
|
||||||
1'b0;
|
|
||||||
assign sd_wr[2] = (drive_index == 3'd3) ? wd1793_sd_wr:
|
|
||||||
1'b0;
|
|
||||||
assign sd_wr[3] = (drive_index == 3'd4) ? wd1793_sd_wr:
|
|
||||||
1'b0;
|
|
||||||
|
|
||||||
assign wd1793_sd_ack = (drive_index == 3'd1) ? sd_ack[0]:
|
|
||||||
(drive_index == 3'd2) ? sd_ack[1]:
|
|
||||||
(drive_index == 3'd3) ? sd_ack[2]:
|
|
||||||
(drive_index == 3'd4) ? sd_ack[3]:
|
|
||||||
sd_ack[0]; // default is drive 1
|
|
||||||
|
|
||||||
assign sd_buff_din[0] = wd1793_sd_buff_din;
|
|
||||||
assign sd_buff_din[1] = wd1793_sd_buff_din;
|
|
||||||
assign sd_buff_din[2] = wd1793_sd_buff_din;
|
|
||||||
assign sd_buff_din[3] = wd1793_sd_buff_din;
|
|
||||||
|
|
||||||
|
|
||||||
// The SD_BLK interface and thus the wd1793 will allways transfer 1 blk. This is blk qty - 1 per spec.
|
// The SD_BLK interface and thus the wd1793 will allways transfer 1 blk. This is blk qty - 1 per spec.
|
||||||
@@ -358,13 +385,6 @@ reg drive_wp[4];
|
|||||||
reg [3:0] drive_ready = 4'B0000;
|
reg [3:0] drive_ready = 4'B0000;
|
||||||
reg [3:0] double_sided = 4'B0000;
|
reg [3:0] double_sided = 4'B0000;
|
||||||
reg [23:0] drive_size[4];
|
reg [23:0] drive_size[4];
|
||||||
wire [23:0] selected_drive_size;
|
|
||||||
wire [31:0] wd1793_sd_lba;
|
|
||||||
wire wd1793_sd_rd;
|
|
||||||
wire wd1793_sd_wr;
|
|
||||||
wire wd1793_sd_ack;
|
|
||||||
wire [7:0] wd1793_sd_buff_din;
|
|
||||||
wire selected_drive_ready, selected_drive_wp, selected_double_sided;
|
|
||||||
|
|
||||||
|
|
||||||
// As drives are mounted in MISTer this logic saves the write protect and generates ready for
|
// As drives are mounted in MISTer this logic saves the write protect and generates ready for
|
||||||
@@ -413,28 +433,6 @@ begin
|
|||||||
//double_sided[3]<= img_size > 20'd368600;//20'd368640;
|
//double_sided[3]<= img_size > 20'd368600;//20'd368640;
|
||||||
end
|
end
|
||||||
|
|
||||||
assign selected_drive_size = (drive_index == 3'd1) ? drive_size[0]:
|
|
||||||
(drive_index == 3'd2) ? drive_size[1]:
|
|
||||||
(drive_index == 3'd3) ? drive_size[2]:
|
|
||||||
(drive_index == 3'd4) ? drive_size[3]:
|
|
||||||
drive_size[0]; // default is drive 1
|
|
||||||
|
|
||||||
assign selected_drive_wp = (drive_index == 3'd1) ? drive_wp[0]:
|
|
||||||
(drive_index == 3'd2) ? drive_wp[1]:
|
|
||||||
(drive_index == 3'd3) ? drive_wp[2]:
|
|
||||||
(drive_index == 3'd4) ? drive_wp[3]:
|
|
||||||
drive_wp[0]; // default is drive 1
|
|
||||||
|
|
||||||
assign selected_double_sided= (drive_index == 3'd1) ? double_sided[0]:
|
|
||||||
(drive_index == 3'd2) ? double_sided[1]:
|
|
||||||
(drive_index == 3'd3) ? double_sided[2]:
|
|
||||||
double_sided[0]; // default is drive 1
|
|
||||||
|
|
||||||
assign selected_drive_ready = (drive_index == 3'd1) ? drive_ready[0]:
|
|
||||||
(drive_index == 3'd2) ? drive_ready[1]:
|
|
||||||
(drive_index == 3'd3) ? drive_ready[2]:
|
|
||||||
(drive_index == 3'd4) ? drive_ready[3]:
|
|
||||||
1'b0; // default is not ready
|
|
||||||
|
|
||||||
wd1793 #(1,0) coco_wd1793_0
|
wd1793 #(1,0) coco_wd1793_0
|
||||||
(
|
(
|
||||||
@@ -442,34 +440,160 @@ wd1793 #(1,0) coco_wd1793_0
|
|||||||
.ce(ena_8Mhz),
|
.ce(ena_8Mhz),
|
||||||
.reset(~RESET_N),
|
.reset(~RESET_N),
|
||||||
.io_en(1'b1),
|
.io_en(1'b1),
|
||||||
.rd(RD),
|
.rd(RD[0]),
|
||||||
.wr(WR),
|
.wr(WR[0]),
|
||||||
.addr(ADDRESS_L[1:0]),
|
.addr(ADDRESS_L[1:0]),
|
||||||
.din(DATA_IN_L),
|
.din(DATA_IN_L),
|
||||||
.dout(DATA_1793),
|
.dout(dout[0]),
|
||||||
.drq(selected_DRQ),
|
.drq(DRQ[0]),
|
||||||
.intrq(selected_INTRQ),
|
.intrq(INTRQ[0]),
|
||||||
|
|
||||||
.img_mounted(1'b0),
|
.img_mounted(1'b0),
|
||||||
.img_mounted_overide(1'b1),
|
.img_mounted_overide(1'b1),
|
||||||
.img_size(selected_drive_size[19:0]),
|
.img_size(drive_size[0]),
|
||||||
|
|
||||||
.sd_lba(wd1793_sd_lba),
|
.sd_lba(sd_lba[0]),
|
||||||
.sd_rd(wd1793_sd_rd),
|
.sd_rd(sd_rd[0]),
|
||||||
.sd_wr(wd1793_sd_wr),
|
.sd_wr(sd_wr[0]),
|
||||||
.sd_ack(wd1793_sd_ack),
|
.sd_ack(sd_ack[0]),
|
||||||
|
|
||||||
.sd_buff_addr(sd_buff_addr),
|
.sd_buff_addr(sd_buff_addr),
|
||||||
.sd_buff_dout(sd_buff_dout),
|
.sd_buff_dout(sd_buff_dout),
|
||||||
.sd_buff_din(wd1793_sd_buff_din),
|
.sd_buff_din(sd_buff_din[0]),
|
||||||
.sd_buff_wr(sd_buff_wr),
|
.sd_buff_wr(sd_buff_wr),
|
||||||
|
|
||||||
.wp(selected_drive_wp),
|
.wp(drive_wp[0]),
|
||||||
|
|
||||||
.size_code(3'd5), // 5 is 18 sector x 256 bits COCO standard
|
.size_code(3'd5), // 5 is 18 sector x 256 bits COCO standard
|
||||||
.layout(~selected_double_sided), // 0 = Track-Side-Sector, 1 - Side-Track-Sector
|
.layout(~double_sided[0]), // 0 = Track-Side-Sector, 1 - Side-Track-Sector
|
||||||
.side(selected_double_sided & DRIVE_SEL_EXT[3]),
|
.side(double_sided[0] & DRIVE_SEL_EXT[3]),
|
||||||
.ready(selected_drive_ready),
|
.ready(drive_ready[0]),
|
||||||
|
|
||||||
|
.input_active(0), // Section not used
|
||||||
|
.input_addr(0),
|
||||||
|
.input_data(0),
|
||||||
|
.input_wr(0),
|
||||||
|
.buff_din(0)
|
||||||
|
);
|
||||||
|
|
||||||
|
wd1793 #(1,0) coco_wd1793_1
|
||||||
|
(
|
||||||
|
.clk_sys(~CLK),
|
||||||
|
.ce(ena_8Mhz),
|
||||||
|
.reset(~RESET_N),
|
||||||
|
.io_en(1'b1),
|
||||||
|
.rd(RD[1]),
|
||||||
|
.wr(WR[1]),
|
||||||
|
.addr(ADDRESS_L[1:0]),
|
||||||
|
.din(DATA_IN_L),
|
||||||
|
.dout(dout[1]),
|
||||||
|
.drq(DRQ[1]),
|
||||||
|
.intrq(INTRQ[1]),
|
||||||
|
|
||||||
|
.img_mounted(1'b0),
|
||||||
|
.img_mounted_overide(1'b1),
|
||||||
|
.img_size(drive_size[1]),
|
||||||
|
|
||||||
|
.sd_lba(sd_lba[1]),
|
||||||
|
.sd_rd(sd_rd[1]),
|
||||||
|
.sd_wr(sd_wr[1]),
|
||||||
|
.sd_ack(sd_ack[1]),
|
||||||
|
|
||||||
|
.sd_buff_addr(sd_buff_addr),
|
||||||
|
.sd_buff_dout(sd_buff_dout),
|
||||||
|
.sd_buff_din(sd_buff_din[1]),
|
||||||
|
.sd_buff_wr(sd_buff_wr),
|
||||||
|
|
||||||
|
.wp(drive_wp[1]),
|
||||||
|
|
||||||
|
.size_code(3'd5), // 5 is 18 sector x 256 bits COCO standard
|
||||||
|
.layout(~double_sided[1]), // 0 = Track-Side-Sector, 1 - Side-Track-Sector
|
||||||
|
.side(double_sided[1] & DRIVE_SEL_EXT[3]),
|
||||||
|
.ready(drive_ready[1]),
|
||||||
|
|
||||||
|
.input_active(0), // Section not used
|
||||||
|
.input_addr(0),
|
||||||
|
.input_data(0),
|
||||||
|
.input_wr(0),
|
||||||
|
.buff_din(0)
|
||||||
|
);
|
||||||
|
|
||||||
|
wd1793 #(1,0) coco_wd1793_2
|
||||||
|
(
|
||||||
|
.clk_sys(~CLK),
|
||||||
|
.ce(ena_8Mhz),
|
||||||
|
.reset(~RESET_N),
|
||||||
|
.io_en(1'b1),
|
||||||
|
.rd(RD[2]),
|
||||||
|
.wr(WR[2]),
|
||||||
|
.addr(ADDRESS_L[1:0]),
|
||||||
|
.din(DATA_IN_L),
|
||||||
|
.dout(dout[2]),
|
||||||
|
.drq(DRQ[2]),
|
||||||
|
.intrq(INTRQ[2]),
|
||||||
|
|
||||||
|
.img_mounted(1'b0),
|
||||||
|
.img_mounted_overide(1'b1),
|
||||||
|
.img_size(drive_size[2]),
|
||||||
|
|
||||||
|
.sd_lba(sd_lba[2]),
|
||||||
|
.sd_rd(sd_rd[2]),
|
||||||
|
.sd_wr(sd_wr[2]),
|
||||||
|
.sd_ack(sd_ack[2]),
|
||||||
|
|
||||||
|
.sd_buff_addr(sd_buff_addr),
|
||||||
|
.sd_buff_dout(sd_buff_dout),
|
||||||
|
.sd_buff_din(sd_buff_din[2]),
|
||||||
|
.sd_buff_wr(sd_buff_wr),
|
||||||
|
|
||||||
|
.wp(drive_wp[2]),
|
||||||
|
|
||||||
|
.size_code(3'd5), // 5 is 18 sector x 256 bits COCO standard
|
||||||
|
.layout(~double_sided[2]), // 0 = Track-Side-Sector, 1 - Side-Track-Sector
|
||||||
|
.side(double_sided[2] & DRIVE_SEL_EXT[3]),
|
||||||
|
.ready(drive_ready[2]),
|
||||||
|
|
||||||
|
.input_active(0), // Section not used
|
||||||
|
.input_addr(0),
|
||||||
|
.input_data(0),
|
||||||
|
.input_wr(0),
|
||||||
|
.buff_din(0)
|
||||||
|
);
|
||||||
|
|
||||||
|
wd1793 #(1,0) coco_wd1793_3
|
||||||
|
(
|
||||||
|
.clk_sys(~CLK),
|
||||||
|
.ce(ena_8Mhz),
|
||||||
|
.reset(~RESET_N),
|
||||||
|
.io_en(1'b1),
|
||||||
|
.rd(RD[3]),
|
||||||
|
.wr(WR[3]),
|
||||||
|
.addr(ADDRESS_L[1:0]),
|
||||||
|
.din(DATA_IN_L),
|
||||||
|
.dout(dout[3]),
|
||||||
|
.drq(DRQ[3]),
|
||||||
|
.intrq(INTRQ[3]),
|
||||||
|
|
||||||
|
.img_mounted(1'b0),
|
||||||
|
.img_mounted_overide(1'b1),
|
||||||
|
.img_size(drive_size[3]),
|
||||||
|
|
||||||
|
.sd_lba(sd_lba[3]),
|
||||||
|
.sd_rd(sd_rd[3]),
|
||||||
|
.sd_wr(sd_wr[3]),
|
||||||
|
.sd_ack(sd_ack[3]),
|
||||||
|
|
||||||
|
.sd_buff_addr(sd_buff_addr),
|
||||||
|
.sd_buff_dout(sd_buff_dout),
|
||||||
|
.sd_buff_din(sd_buff_din[3]),
|
||||||
|
.sd_buff_wr(sd_buff_wr),
|
||||||
|
|
||||||
|
.wp(drive_wp[3]),
|
||||||
|
|
||||||
|
.size_code(3'd5), // 5 is 18 sector x 256 bits COCO standard
|
||||||
|
.layout(1'b1), // 0 = Track-Side-Sector, 1 - Side-Track-Sector
|
||||||
|
.side(1'b0),
|
||||||
|
.ready(drive_ready[3]),
|
||||||
|
|
||||||
.input_active(0), // Section not used
|
.input_active(0), // Section not used
|
||||||
.input_addr(0),
|
.input_addr(0),
|
||||||
|
|||||||
+3
-2
@@ -47,8 +47,6 @@
|
|||||||
////////////////////////////////////////////////////////////////////////////////
|
////////////////////////////////////////////////////////////////////////////////
|
||||||
////////////////////////////////////////////////////////////////////////////////
|
////////////////////////////////////////////////////////////////////////////////
|
||||||
|
|
||||||
// Define Config features
|
|
||||||
`include "../RTL/config.v"
|
|
||||||
|
|
||||||
module sdc(
|
module sdc(
|
||||||
input CLK, // clock
|
input CLK, // clock
|
||||||
@@ -89,6 +87,9 @@ module sdc(
|
|||||||
|
|
||||||
);
|
);
|
||||||
|
|
||||||
|
// Define Config features
|
||||||
|
`include "../rtl/config.sv"
|
||||||
|
|
||||||
reg [23:0] LSN;
|
reg [23:0] LSN;
|
||||||
reg [7:0] command;
|
reg [7:0] command;
|
||||||
reg [7:0] transfer_address;
|
reg [7:0] transfer_address;
|
||||||
|
|||||||
+107
-74
@@ -146,54 +146,27 @@ assign DATA_HDD =
|
|||||||
|
|
||||||
wire [31:0] sdc_sd_lba[2];
|
wire [31:0] sdc_sd_lba[2];
|
||||||
wire [31:0] fdc_sd_lba[2];
|
wire [31:0] fdc_sd_lba[2];
|
||||||
wire [31:0] wd1793_sd_lba;
|
|
||||||
wire [1:0] sdc_sd_rd;
|
wire [1:0] sdc_sd_rd;
|
||||||
wire wd1793_sd_rd;
|
|
||||||
wire [1:0] fdc_sd_rd;
|
wire [1:0] fdc_sd_rd;
|
||||||
wire [1:0] sdc_sd_wr;
|
wire [1:0] sdc_sd_wr;
|
||||||
wire [1:0] fdc_sd_wr;
|
wire [1:0] fdc_sd_wr;
|
||||||
wire wd1793_sd_wr;
|
|
||||||
wire [7:0] sdc_sd_buff_din[2];
|
wire [7:0] sdc_sd_buff_din[2];
|
||||||
wire [7:0] fdc_sd_buff_din[2];
|
wire [7:0] fdc_sd_buff_din[2];
|
||||||
wire [7:0] wd1793_sd_buff_din;
|
wire [7:0] wd1793_sd_buff_din;
|
||||||
wire wd1793_sd_ack;
|
|
||||||
wire sdc_HALT;
|
wire sdc_HALT;
|
||||||
|
|
||||||
assign sd_lba[0:1] = SDC_EN ? sdc_sd_lba[0:1]:
|
assign sd_lba[0:1] = SDC_EN ? sdc_sd_lba[0:1]:
|
||||||
fdc_sd_lba[0:1];
|
fdc_sd_lba[0:1];
|
||||||
|
|
||||||
assign fdc_sd_lba[0] = wd1793_sd_lba;
|
|
||||||
assign fdc_sd_lba[1] = wd1793_sd_lba;
|
|
||||||
|
|
||||||
assign sd_rd[1:0] = SDC_EN ? sdc_sd_rd[1:0]:
|
assign sd_rd[1:0] = SDC_EN ? sdc_sd_rd[1:0]:
|
||||||
fdc_sd_rd[1:0];
|
fdc_sd_rd[1:0];
|
||||||
|
|
||||||
assign fdc_sd_rd[0] = (drive_index == 3'd1) ? wd1793_sd_rd:
|
|
||||||
1'b0;
|
|
||||||
|
|
||||||
assign fdc_sd_rd[1] = (drive_index == 3'd2) ? wd1793_sd_rd:
|
|
||||||
1'b0;
|
|
||||||
|
|
||||||
assign sd_wr[1:0] = SDC_EN ? sdc_sd_wr[1:0]:
|
assign sd_wr[1:0] = SDC_EN ? sdc_sd_wr[1:0]:
|
||||||
fdc_sd_wr[1:0];
|
fdc_sd_wr[1:0];
|
||||||
|
|
||||||
assign fdc_sd_wr[0] = (drive_index == 3'd1) ? wd1793_sd_wr:
|
|
||||||
1'b0;
|
|
||||||
|
|
||||||
assign fdc_sd_wr[1] = (drive_index == 3'd2) ? wd1793_sd_wr:
|
|
||||||
1'b0;
|
|
||||||
|
|
||||||
assign sd_buff_din[0:1] = SDC_EN ? sdc_sd_buff_din[0:1]:
|
assign sd_buff_din[0:1] = SDC_EN ? sdc_sd_buff_din[0:1]:
|
||||||
fdc_sd_buff_din[0:1];
|
fdc_sd_buff_din[0:1];
|
||||||
|
|
||||||
assign fdc_sd_buff_din[0] = wd1793_sd_buff_din;
|
|
||||||
assign fdc_sd_buff_din[1] = wd1793_sd_buff_din;
|
|
||||||
|
|
||||||
|
|
||||||
assign wd1793_sd_ack = (drive_index == 3'd1) ? sd_ack[0]:
|
|
||||||
(drive_index == 3'd2) ? sd_ack[1]:
|
|
||||||
sd_ack[0]; // default is drive 1
|
|
||||||
|
|
||||||
|
|
||||||
sdc coco_sdc(
|
sdc coco_sdc(
|
||||||
.CLK(CLK), // clock
|
.CLK(CLK), // clock
|
||||||
@@ -277,13 +250,13 @@ begin
|
|||||||
drive_index <= 3'd1;
|
drive_index <= 3'd1;
|
||||||
|
|
||||||
4'b1011: // This is what the Magic Number $43 does so we select a non-active drive
|
4'b1011: // This is what the Magic Number $43 does so we select a non-active drive
|
||||||
drive_index <= 3'd0;
|
drive_index <= 3'd1;
|
||||||
4'b1000: // This is no drive with DS = illegal drive
|
4'b1000: // This is no drive with DS = illegal drive
|
||||||
drive_index <= 3'd0;
|
drive_index <= 3'd1;
|
||||||
4'b0000: // This is no drive (maybe 0 in ff40) = illegal drive
|
4'b0000: // This is no drive (maybe 0 in ff40) = illegal drive
|
||||||
drive_index <= 3'd0;
|
drive_index <= 3'd1;
|
||||||
default:
|
default:
|
||||||
drive_index <= 3'd0;
|
drive_index <= 3'd1;
|
||||||
endcase
|
endcase
|
||||||
end
|
end
|
||||||
end
|
end
|
||||||
@@ -310,14 +283,17 @@ end
|
|||||||
|
|
||||||
// Control signals for the wd1793
|
// Control signals for the wd1793
|
||||||
|
|
||||||
|
wire INTRQ[2];
|
||||||
|
wire DRQ[2];
|
||||||
wire selected_DRQ;
|
wire selected_DRQ;
|
||||||
wire selected_INTRQ;
|
wire selected_INTRQ;
|
||||||
|
|
||||||
wire WR;
|
wire WR[2];
|
||||||
wire RD;
|
wire RD[2];
|
||||||
wire RD_E;
|
wire RD_E[2];
|
||||||
wire HALT_EN_RST;
|
wire HALT_EN_RST;
|
||||||
wire [7:0] DATA_1793;
|
wire [7:0] DATA_1793;
|
||||||
|
wire [7:0] dout[2];
|
||||||
reg read;
|
reg read;
|
||||||
reg write;
|
reg write;
|
||||||
reg read_d;
|
reg read_d;
|
||||||
@@ -329,7 +305,8 @@ reg read1;
|
|||||||
reg write1;
|
reg write1;
|
||||||
reg [1:0] ADDRESS_L;
|
reg [1:0] ADDRESS_L;
|
||||||
|
|
||||||
assign RD = (read || RD_E); // Even with no drive selected allow read to the controller
|
assign RD[0] = (read || RD_E[0]) && (drive_index == 2'd1);
|
||||||
|
assign RD[1] = (read || RD_E[1]) && (drive_index == 3'd2);
|
||||||
|
|
||||||
// The idea here is to "stretch" the CPU read and write signals to ensure we catch a 8 mhz enable.
|
// The idea here is to "stretch" the CPU read and write signals to ensure we catch a 8 mhz enable.
|
||||||
// For writes we will buffer the data out to ensure it does not go away.
|
// For writes we will buffer the data out to ensure it does not go away.
|
||||||
@@ -350,8 +327,10 @@ begin
|
|||||||
write_d <= 1'b0;
|
write_d <= 1'b0;
|
||||||
r_w_active <= 1'b0;
|
r_w_active <= 1'b0;
|
||||||
clk_8Mhz_enable_found <= 1'b0;
|
clk_8Mhz_enable_found <= 1'b0;
|
||||||
WR <= 1'b0;
|
WR[0] <= 1'b0;
|
||||||
RD_E <= 1'b0;
|
WR[1] <= 1'b0;
|
||||||
|
RD_E[0] <= 1'b0;
|
||||||
|
RD_E[1] <= 1'b0;
|
||||||
read1 <= 1'b0;
|
read1 <= 1'b0;
|
||||||
write1 <= 1'b0;
|
write1 <= 1'b0;
|
||||||
read <= 1'b0;
|
read <= 1'b0;
|
||||||
@@ -383,14 +362,24 @@ begin
|
|||||||
begin
|
begin
|
||||||
// Set Write
|
// Set Write
|
||||||
r_w_active <= 1'b1;
|
r_w_active <= 1'b1;
|
||||||
WR <= 1'b1;
|
case (drive_index)
|
||||||
|
3'd1:
|
||||||
|
WR[0] <= 1'b1;
|
||||||
|
3'd2:
|
||||||
|
WR[1] <= 1'b1;
|
||||||
|
endcase
|
||||||
end
|
end
|
||||||
|
|
||||||
// Synchronus rising edge of read
|
// Synchronus rising edge of read
|
||||||
if ((read == 1'b1) && (read_d == 1'b0))
|
if ((read == 1'b1) && (read_d == 1'b0))
|
||||||
begin
|
begin
|
||||||
r_w_active <= 1'b1;
|
r_w_active <= 1'b1;
|
||||||
RD_E <= 1'b1;
|
case (drive_index)
|
||||||
|
3'd1:
|
||||||
|
RD_E[0] <= 1'b1;
|
||||||
|
3'd2:
|
||||||
|
RD_E[1] <= 1'b1;
|
||||||
|
endcase
|
||||||
end
|
end
|
||||||
|
|
||||||
// Clears
|
// Clears
|
||||||
@@ -402,23 +391,42 @@ begin
|
|||||||
begin
|
begin
|
||||||
clk_8Mhz_enable_found <= 1'b0;
|
clk_8Mhz_enable_found <= 1'b0;
|
||||||
r_w_active <= 1'b0;
|
r_w_active <= 1'b0;
|
||||||
WR <= 1'b0;
|
WR[0] <= 1'b0;
|
||||||
RD_E <= 1'b0;
|
WR[1] <= 1'b0;
|
||||||
|
|
||||||
|
RD_E[0] <= 1'b0;
|
||||||
|
RD_E[1] <= 1'b0;
|
||||||
end
|
end
|
||||||
end
|
end
|
||||||
end
|
end
|
||||||
|
|
||||||
|
|
||||||
// NMI from disk controller
|
// NMI from disk controller
|
||||||
|
// Selected INTRQ
|
||||||
|
assign selected_INTRQ = (drive_index == 3'd1) ? INTRQ[0]:
|
||||||
|
(drive_index == 3'd2) ? INTRQ[1]:
|
||||||
|
1'b0;
|
||||||
|
|
||||||
assign NMI_09 = ~SDC_EN & DENSITY & selected_INTRQ; // Send NMI if Double Density (Halt Mode)
|
assign NMI_09 = ~SDC_EN & DENSITY & selected_INTRQ; // Send NMI if Double Density (Halt Mode)
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
// HALT from disk controller
|
// HALT from disk controller
|
||||||
|
|
||||||
|
// Selected DRQ
|
||||||
|
assign selected_DRQ = (drive_index == 3'd1) ? DRQ[0]:
|
||||||
|
(drive_index == 3'd2) ? DRQ[1]:
|
||||||
|
1'b1;
|
||||||
|
|
||||||
assign HALT = (~SDC_EN & HALT_EN & ~selected_DRQ) | sdc_HALT;
|
assign HALT = (~SDC_EN & HALT_EN & ~selected_DRQ) | sdc_HALT;
|
||||||
|
|
||||||
assign HALT_EN_RST = RESET_N & ~selected_INTRQ; // From controller schematic
|
assign HALT_EN_RST = RESET_N & ~selected_INTRQ; // From controller schematic
|
||||||
|
|
||||||
|
// Data bus selection
|
||||||
|
assign DATA_1793 = (drive_index == 3'd1) ? dout[0]:
|
||||||
|
(drive_index == 3'd2) ? dout[1]:
|
||||||
|
8'd0;
|
||||||
|
|
||||||
|
|
||||||
// The SD_BLK interface and thus the wd1793 will allways transfer 1 blk. This is blk qty - 1 per spec.
|
// The SD_BLK interface and thus the wd1793 will allways transfer 1 blk. This is blk qty - 1 per spec.
|
||||||
assign sd_blk_cnt[1] = 6'd0;
|
assign sd_blk_cnt[1] = 6'd0;
|
||||||
@@ -428,8 +436,6 @@ reg drive_wp[2];
|
|||||||
reg [1:0] drive_ready = 2'b00;
|
reg [1:0] drive_ready = 2'b00;
|
||||||
reg [1:0] double_sided = 2'b00;
|
reg [1:0] double_sided = 2'b00;
|
||||||
reg [31:0] drive_size[2];
|
reg [31:0] drive_size[2];
|
||||||
wire [31:0] selected_drive_size;
|
|
||||||
wire selected_drive_ready, selected_drive_wp, selected_double_sided;
|
|
||||||
|
|
||||||
// As drives are mounted in MISTer this logic saves the write protect and generates ready for
|
// As drives are mounted in MISTer this logic saves the write protect and generates ready for
|
||||||
// changing drives to the wd1793.
|
// changing drives to the wd1793.
|
||||||
@@ -457,56 +463,83 @@ begin
|
|||||||
double_sided[1]<= (img_size > 64'd368600) & (img_size < 64'd740000);//20'd368640;
|
double_sided[1]<= (img_size > 64'd368600) & (img_size < 64'd740000);//20'd368640;
|
||||||
end
|
end
|
||||||
|
|
||||||
assign selected_drive_size = (drive_index == 3'd1) ? drive_size[0]:
|
|
||||||
(drive_index == 3'd2) ? drive_size[1]:
|
|
||||||
drive_size[0]; // default is drive 1
|
|
||||||
|
|
||||||
assign selected_drive_wp = (drive_index == 3'd1) ? drive_wp[0]:
|
wd1793 #(1,0) coco_wd1793_sdc_0
|
||||||
(drive_index == 3'd2) ? drive_wp[1]:
|
|
||||||
drive_wp[0]; // default is drive 1
|
|
||||||
|
|
||||||
assign selected_double_sided= (drive_index == 3'd1) ? double_sided[0]:
|
|
||||||
(drive_index == 3'd2) ? double_sided[1]:
|
|
||||||
double_sided[0]; // default is drive 1
|
|
||||||
|
|
||||||
assign selected_drive_ready = (drive_index == 3'd1) ? drive_ready[0]:
|
|
||||||
(drive_index == 3'd2) ? drive_ready[1]:
|
|
||||||
drive_ready[0]; // default is drive 1
|
|
||||||
|
|
||||||
wd1793 #(1,0) coco_wd1793_sdc
|
|
||||||
(
|
(
|
||||||
.clk_sys(~CLK),
|
.clk_sys(~CLK),
|
||||||
.ce(ena_8Mhz),
|
.ce(ena_8Mhz),
|
||||||
.reset(~RESET_N),
|
.reset(~RESET_N),
|
||||||
.io_en(1'b1),
|
.io_en(1'b1),
|
||||||
.rd(RD),
|
.rd(RD[0]),
|
||||||
.wr(WR),
|
.wr(WR[0]),
|
||||||
.addr(ADDRESS_L[1:0]),
|
.addr(ADDRESS_L[1:0]),
|
||||||
.din(DATA_IN_L),
|
.din(DATA_IN_L),
|
||||||
.dout(DATA_1793),
|
.dout(dout[0]),
|
||||||
.drq(selected_DRQ),
|
.drq(DRQ[0]),
|
||||||
.intrq(selected_INTRQ),
|
.intrq(INTRQ[0]),
|
||||||
|
|
||||||
.img_mounted(1'b0), // Not used when using _override
|
.img_mounted(1'b0), // Not used when using _override
|
||||||
.img_mounted_overide(1'b1), // Load img_size and layout on each clock
|
.img_mounted_overide(1'b1), // Load img_size and layout on each clock
|
||||||
.img_size(selected_drive_size[19:0]),
|
.img_size(drive_size[0]),
|
||||||
|
|
||||||
.sd_lba(wd1793_sd_lba),
|
.sd_lba(fdc_sd_lba[0]),
|
||||||
.sd_rd(wd1793_sd_rd),
|
.sd_rd(fdc_sd_rd[0]),
|
||||||
.sd_wr(wd1793_sd_wr),
|
.sd_wr(fdc_sd_wr[0]),
|
||||||
.sd_ack(wd1793_sd_ack),
|
.sd_ack(sd_ack[0]),
|
||||||
|
|
||||||
.sd_buff_addr(sd_buff_addr),
|
.sd_buff_addr(sd_buff_addr),
|
||||||
.sd_buff_dout(sd_buff_dout),
|
.sd_buff_dout(sd_buff_dout),
|
||||||
.sd_buff_din(wd1793_sd_buff_din),
|
.sd_buff_din(fdc_sd_buff_din[0]),
|
||||||
.sd_buff_wr(sd_buff_wr),
|
.sd_buff_wr(sd_buff_wr),
|
||||||
|
|
||||||
.wp(selected_drive_wp),
|
.wp(drive_wp[0]),
|
||||||
|
|
||||||
.size_code(3'd5), // 5 is 18 sector x 256 bits COCO standard
|
.size_code(3'd5), // 5 is 18 sector x 256 bits COCO standard
|
||||||
.layout(~selected_double_sided), // 0 = Track-Side-Sector, 1 - Side-Track-Sector
|
.layout(~double_sided[0]), // 0 = Track-Side-Sector, 1 - Side-Track-Sector
|
||||||
.side(selected_double_sided & DRIVE_SEL_EXT[3]),
|
.side(double_sided[0] & DRIVE_SEL_EXT[3]),
|
||||||
.ready(selected_drive_ready),
|
.ready(drive_ready[0]),
|
||||||
|
|
||||||
|
.input_active(0), // Section not used
|
||||||
|
.input_addr(0),
|
||||||
|
.input_data(0),
|
||||||
|
.input_wr(0),
|
||||||
|
.buff_din(0)
|
||||||
|
);
|
||||||
|
|
||||||
|
wd1793 #(1,0) coco_wd1793_sdc_1
|
||||||
|
(
|
||||||
|
.clk_sys(~CLK),
|
||||||
|
.ce(ena_8Mhz),
|
||||||
|
.reset(~RESET_N),
|
||||||
|
.io_en(1'b1),
|
||||||
|
.rd(RD[1]),
|
||||||
|
.wr(WR[1]),
|
||||||
|
.addr(ADDRESS_L[1:0]),
|
||||||
|
.din(DATA_IN_L),
|
||||||
|
.dout(dout[1]),
|
||||||
|
.drq(DRQ[1]),
|
||||||
|
.intrq(INTRQ[1]),
|
||||||
|
|
||||||
|
.img_mounted(1'b0), // Not used when using _override
|
||||||
|
.img_mounted_overide(1'b1), // Load img_size and layout on each clock
|
||||||
|
.img_size(drive_size[1]),
|
||||||
|
|
||||||
|
.sd_lba(fdc_sd_lba[1]),
|
||||||
|
.sd_rd(fdc_sd_rd[1]),
|
||||||
|
.sd_wr(fdc_sd_wr[1]),
|
||||||
|
.sd_ack(sd_ack[1]),
|
||||||
|
|
||||||
|
.sd_buff_addr(sd_buff_addr),
|
||||||
|
.sd_buff_dout(sd_buff_dout),
|
||||||
|
.sd_buff_din(fdc_sd_buff_din[1]),
|
||||||
|
.sd_buff_wr(sd_buff_wr),
|
||||||
|
|
||||||
|
.wp(drive_wp[1]),
|
||||||
|
|
||||||
|
.size_code(3'd5), // 5 is 18 sector x 256 bits COCO standard
|
||||||
|
.layout(~double_sided[1]), // 0 = Track-Side-Sector, 1 - Side-Track-Sector
|
||||||
|
.side(double_sided[1] & DRIVE_SEL_EXT[3]),
|
||||||
|
.ready(drive_ready[1]),
|
||||||
|
|
||||||
.input_active(0), // Section not used
|
.input_active(0), // Section not used
|
||||||
.input_addr(0),
|
.input_addr(0),
|
||||||
|
|||||||
+26
-1
@@ -2,13 +2,16 @@
|
|||||||
# Build TimeStamp Verilog Module
|
# Build TimeStamp Verilog Module
|
||||||
# Jeff Wiencrot - 8/1/2011
|
# Jeff Wiencrot - 8/1/2011
|
||||||
# Sorgelig - 02/11/2019
|
# Sorgelig - 02/11/2019
|
||||||
|
# Stan Hodge - 04/22/2024
|
||||||
|
|
||||||
proc generateBuildID_Verilog {} {
|
proc generateBuildID_Verilog {} {
|
||||||
|
|
||||||
# Get the timestamp (see: http://www.altera.com/support/examples/tcl/tcl-date-time-stamp.html)
|
# Get the timestamp (see: http://www.altera.com/support/examples/tcl/tcl-date-time-stamp.html)
|
||||||
set buildDate "`define BUILD_DATE \"[clock format [ clock seconds ] -format %y%m%d]\""
|
set buildDate "`define BUILD_DATE \"[clock format [ clock seconds ] -format %y%m%d]\""
|
||||||
|
|
||||||
# Create a Verilog file for output
|
# Create a Verilog file(s) for output
|
||||||
set outputFileName "build_id.v"
|
set outputFileName "build_id.v"
|
||||||
|
set outputFileNameNum "build_id_num.v"
|
||||||
|
|
||||||
set fileData ""
|
set fileData ""
|
||||||
if { [file exists $outputFileName]} {
|
if { [file exists $outputFileName]} {
|
||||||
@@ -17,13 +20,35 @@ proc generateBuildID_Verilog {} {
|
|||||||
close $outputFile
|
close $outputFile
|
||||||
}
|
}
|
||||||
|
|
||||||
|
set fileData_num ""
|
||||||
|
if { [file exists $outputFileNameNum]} {
|
||||||
|
set outputFile [open $outputFileNameNum "r"]
|
||||||
|
set fileData_num [read $outputFile]
|
||||||
|
close $outputFile
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
if {$buildDate ne $fileData} {
|
if {$buildDate ne $fileData} {
|
||||||
set outputFile [open $outputFileName "w"]
|
set outputFile [open $outputFileName "w"]
|
||||||
puts -nonewline $outputFile $buildDate
|
puts -nonewline $outputFile $buildDate
|
||||||
close $outputFile
|
close $outputFile
|
||||||
|
|
||||||
|
set buildnumbervar 1
|
||||||
|
|
||||||
# Send confirmation message to the Messages window
|
# Send confirmation message to the Messages window
|
||||||
post_message "Generated: [pwd]/$outputFileName: $buildDate"
|
post_message "Generated: [pwd]/$outputFileName: $buildDate"
|
||||||
|
} else {
|
||||||
|
scan $fileData_num "`define BUILD_NUMBER \"%d" buildnumbervar
|
||||||
|
incr buildnumbervar
|
||||||
}
|
}
|
||||||
|
|
||||||
|
set buildnumber "`define BUILD_NUMBER \"[format "%03d" $buildnumbervar]\""
|
||||||
|
set outputFile [open $outputFileNameNum "w"]
|
||||||
|
puts -nonewline $outputFile $buildnumber
|
||||||
|
close $outputFile
|
||||||
|
|
||||||
|
post_message "Generated: [pwd]/$outputFileNameNum: $buildnumber"
|
||||||
|
|
||||||
}
|
}
|
||||||
|
|
||||||
# Build CDF file
|
# Build CDF file
|
||||||
|
|||||||
@@ -1,2 +1,2 @@
|
|||||||
set_instance_assignment -name PLL_COMPENSATION_MODE DIRECT -to "*pll_hdmi_0002*|altera_pll:altera_pll_i*|*"
|
set_instance_assignment -name PLL_COMPENSATION_MODE DIRECT -to "*pll_hdmi_0002*|altera_pll:altera_pll_i*|*"
|
||||||
set_instance_assignment -name UNFORCE_MERGE_PLL_OUTPUT_COUNTER ON -to "*pll_hdmi_0002*|altera_pll:altera_pll_i*|*"
|
#set_instance_assignment -name UNFORCE_MERGE_PLL_OUTPUT_COUNTER ON -to "*pll_hdmi_0002*|altera_pll:altera_pll_i*|*"
|
||||||
@@ -19,6 +19,9 @@
|
|||||||
//
|
//
|
||||||
//============================================================================
|
//============================================================================
|
||||||
|
|
||||||
|
// Define Config features - For CoCo use of USER I/O
|
||||||
|
//`include "../rtl/config.sv"
|
||||||
|
|
||||||
module sys_top
|
module sys_top
|
||||||
(
|
(
|
||||||
/////////// CLOCK //////////
|
/////////// CLOCK //////////
|
||||||
@@ -1526,7 +1529,24 @@ alsa alsa
|
|||||||
`endif
|
`endif
|
||||||
|
|
||||||
//////////////// User I/O (USB 3.0 connector) /////////////////////////
|
//////////////// User I/O (USB 3.0 connector) /////////////////////////
|
||||||
|
// Modifications for use of the CoCo3 with LA
|
||||||
|
`ifdef Config_Debug
|
||||||
|
//assign USER_IO[0] = !user_out[0] ? 1'b0 : 1'bZ;
|
||||||
|
//assign USER_IO[1] = !user_out[1] ? 1'b0 : 1'bZ;
|
||||||
|
//assign USER_IO[2] = !user_out[2] ? 1'b0 : 1'bZ;
|
||||||
|
//assign USER_IO[3] = !user_out[3] ? 1'b0 : 1'bZ;
|
||||||
|
//assign USER_IO[4] = !user_out[4] ? 1'b0 : 1'bZ;
|
||||||
|
//assign USER_IO[5] = !user_out[5] ? 1'b0 : 1'bZ;
|
||||||
|
//assign USER_IO[6] = !user_out[6] ? 1'b0 : 1'bZ;
|
||||||
|
|
||||||
|
assign USER_IO[0] = user_out[0];
|
||||||
|
assign USER_IO[1] = user_out[1];
|
||||||
|
assign USER_IO[2] = user_out[2];
|
||||||
|
assign USER_IO[3] = user_out[3];
|
||||||
|
assign USER_IO[4] = user_out[4];
|
||||||
|
assign USER_IO[5] = user_out[5];
|
||||||
|
assign USER_IO[6] = user_out[6];
|
||||||
|
`else
|
||||||
assign USER_IO[0] = !user_out[0] ? 1'b0 : 1'bZ;
|
assign USER_IO[0] = !user_out[0] ? 1'b0 : 1'bZ;
|
||||||
assign USER_IO[1] = !user_out[1] ? 1'b0 : 1'bZ;
|
assign USER_IO[1] = !user_out[1] ? 1'b0 : 1'bZ;
|
||||||
assign USER_IO[2] = !(SW[1] ? HDMI_I2S : user_out[2]) ? 1'b0 : 1'bZ;
|
assign USER_IO[2] = !(SW[1] ? HDMI_I2S : user_out[2]) ? 1'b0 : 1'bZ;
|
||||||
@@ -1534,6 +1554,7 @@ assign USER_IO[3] = !user_out[3] ? 1'b0 : 1'bZ;
|
|||||||
assign USER_IO[4] = !(SW[1] ? HDMI_SCLK : user_out[4]) ? 1'b0 : 1'bZ;
|
assign USER_IO[4] = !(SW[1] ? HDMI_SCLK : user_out[4]) ? 1'b0 : 1'bZ;
|
||||||
assign USER_IO[5] = !(SW[1] ? HDMI_LRCLK : user_out[5]) ? 1'b0 : 1'bZ;
|
assign USER_IO[5] = !(SW[1] ? HDMI_LRCLK : user_out[5]) ? 1'b0 : 1'bZ;
|
||||||
assign USER_IO[6] = !user_out[6] ? 1'b0 : 1'bZ;
|
assign USER_IO[6] = !user_out[6] ? 1'b0 : 1'bZ;
|
||||||
|
`endif
|
||||||
|
|
||||||
assign user_in[0] = USER_IO[0];
|
assign user_in[0] = USER_IO[0];
|
||||||
assign user_in[1] = USER_IO[1];
|
assign user_in[1] = USER_IO[1];
|
||||||
|
|||||||
Reference in new issue
Block a user