Core changes and CSAVE support.

1.	Added support for cassette save.  To use: A) You have to have a file [anyname.cas]
	which is larger than needed.  B) Select the file through the UI Menu 'Save
	Cassette'.  C)Set 'Cass Rwd=0 / Rec=1' to 1. D) Issue your 'CSAVE "NAME"'
	E) When done, set 'Cass Rwd=0 / Rec=1' to 0 to complete the write.  The file can
	now be loaded or copied.  Note a dummy file of a specific size can be created in
	the MiSTer SSH shell in the /media/fat/games/coco3 with the command:
	'truncate -s 65536 tapefileame.cas'. [Note do NOT use over 65536 file length]
2.	Fixed serial interrupt [6551] to not be functional on slot 3 [carts].
3.	Modification of sys_top.v to override use of USER_IO for HDMI - so it can be used
	for logic analyzer debug.  This will only occur when `define	Config_Debug is
	enabled in config.v.
4.	Fixed MUGS of powerup issue occurring on some MiSTer units.
5.	Fixed incorrect application of GIME_IRQ on legacy interrupts.  Fixed race condition
	on reading IRQ status vs clearing the interrupt.
6.	Improved Castle of Tharoggad.  App now loads but locks as the graphics animate.  This
	change improved mmu usage through to CARTS.
7.	Builds now keep track of multiple builds in the same date.  It shows as V240512-001 in
	the menus.  Its also exposed to BASIC and a boot.vhd which can be enabled to autorun is
	supplied in the archive to show how it works.
8.	Additionally, on the boot.vhd disk, is a program which demonstrated how to load a font -
	IBMFONT.BAS. Run it and it maps a font much like the IBM font to the 80 column format.
	Also, a file called TESTRTC.BAS pulls the MiSTer RTC values exposed in BASIC to display
	a clock.
9.	Large improvement in the Timer function.  Code closer emulates COCO3 Timer. Fixes
	Sliphead cart.
10.	In the 20231023 release the wd1773 instances were reduced to 1 for the FDC and one for
	the FDC.  This saved space but introduced a bug when using multiple drives at the same
	time - like a copy command.  This change was removed and the copy command works again.

To Do...
1.	Add Speech / Music cart
2.	Fix Castle of Tharoggad
This commit is contained in:
shodge12 committed 2024-05-14 23:00:16 -04:00
1 parent a3373d34b9
commit 1da70a7929
27 files changed
+1113 -850

No files matched your search

+213 -89
View File
@@ -135,6 +135,10 @@ wire [3:0] DRIVE_SEL_EXT_PRE = {DATA_IN[6], DATA_IN[2:0]};
reg [2:0] drive_index;
// SD blk system is a array of 4 systems - one for each drive.
// To keep disk track memory, we created 4 wd1793's to match the sd block interfaces
// For the interface back to the coco - we need to isolate the wd1793 the computer is talking
// to and route those feedback signals back to the coco. This is accomplished via the drive
// select. 'drive_index' identifies which controller is addressd.
always @(negedge FF40_CLK or negedge RESET_N)
@@ -178,7 +182,7 @@ begin
4'b1001:
drive_index <= 3'd1;
default:
drive_index <= 3'd0; // Illegal
drive_index <= 3'd1; // Illegal
endcase
end
end
@@ -208,12 +212,13 @@ wire DRQ[4];
wire selected_DRQ;
wire selected_INTRQ;
wire WR;
wire RD;
wire RD_E;
wire WR[4];
wire RD[4];
wire RD_E[4];
//wire CE;
wire HALT_EN_RST;
wire [7:0] DATA_1793;
wire [7:0] dout[4];
reg read;
reg write;
reg read_d;
@@ -225,7 +230,11 @@ reg read1;
reg write1;
reg [1:0] ADDRESS_L;
assign RD = read || RD_E;
assign RD[0] = (read || RD_E[0]) && (drive_index == 2'd1);
assign RD[1] = (read || RD_E[1]) && (drive_index == 3'd2);
assign RD[2] = (read || RD_E[2]) && (drive_index == 3'd3);
assign RD[3] = (read || RD_E[3]) && (drive_index == 3'd4);
// The idea here is to "stretch" the CPU read and write signals to ensure we catch a 8 mhz enable.
// For writes we will buffer the data out to ensure it does not go away.
@@ -244,8 +253,14 @@ begin
write_d <= 1'b0;
r_w_active <= 1'b0;
clk_8Mhz_enable_found <= 1'b0;
WR <= 1'b0;
RD_E <= 1'b0;
WR[0] <= 1'b0;
WR[1] <= 1'b0;
WR[2] <= 1'b0;
WR[3] <= 1'b0;
RD_E[0] <= 1'b0;
RD_E[1] <= 1'b0;
RD_E[2] <= 1'b0;
RD_E[3] <= 1'b0;
read1 <= 1'b0;
write1 <= 1'b0;
read <= 1'b0;
@@ -278,14 +293,32 @@ begin
begin
// Set Writes
r_w_active <= 1'b1;
WR <= 1'b1;
case (drive_index)
3'd1:
WR[0] <= 1'b1;
3'd2:
WR[1] <= 1'b1;
3'd3:
WR[2] <= 1'b1;
3'd4:
WR[3] <= 1'b1;
endcase
end
// Synchronus rising edge of read
if ((read == 1'b1) && (read_d == 1'b0))
begin
r_w_active <= 1'b1;
RD_E <= 1'b1;
case (drive_index)
3'd1:
RD_E[0] <= 1'b1;
3'd2:
RD_E[1] <= 1'b1;
3'd3:
RD_E[2] <= 1'b1;
3'd4:
RD_E[3] <= 1'b1;
endcase
end
// Clears
@@ -298,54 +331,48 @@ begin
clk_8Mhz_enable_found <= 1'b0;
r_w_active <= 1'b0;
WR <= 1'b0;
WR[0] <= 1'b0;
WR[1] <= 1'b0;
WR[2] <= 1'b0;
WR[3] <= 1'b0;
RD_E <= 1'b0;
RD_E[0] <= 1'b0;
RD_E[1] <= 1'b0;
RD_E[2] <= 1'b0;
RD_E[3] <= 1'b0;
end
end
end
// NMI from disk controller
// Selected INTRQ
assign selected_INTRQ = (drive_index == 3'd1) ? INTRQ[0]:
(drive_index == 3'd2) ? INTRQ[1]:
(drive_index == 3'd3) ? INTRQ[2]:
(drive_index == 3'd4) ? INTRQ[3]:
1'b0;
assign NMI_09 = DENSITY & selected_INTRQ; // Send NMI if Double Density (Halt Mode)
// HALT from disk controller
// Selected DRQ
assign selected_DRQ = (drive_index == 3'd1) ? DRQ[0]:
(drive_index == 3'd2) ? DRQ[1]:
(drive_index == 3'd3) ? DRQ[2]:
(drive_index == 3'd4) ? DRQ[3]:
1'b1;
assign HALT = (HALT_EN & ~selected_DRQ);
assign HALT_EN_RST = RESET_N & ~selected_INTRQ; // From controller schematic
assign sd_lba[0] = wd1793_sd_lba;
assign sd_lba[1] = wd1793_sd_lba;
assign sd_lba[2] = wd1793_sd_lba;
assign sd_lba[3] = wd1793_sd_lba;
assign sd_rd[0] = (drive_index == 3'd1) ? wd1793_sd_rd:
1'b0;
assign sd_rd[1] = (drive_index == 3'd2) ? wd1793_sd_rd:
1'b0;
assign sd_rd[2] = (drive_index == 3'd3) ? wd1793_sd_rd:
1'b0;
assign sd_rd[3] = (drive_index == 3'd4) ? wd1793_sd_rd:
1'b0;
assign sd_wr[0] = (drive_index == 3'd1) ? wd1793_sd_wr:
1'b0;
assign sd_wr[1] = (drive_index == 3'd2) ? wd1793_sd_wr:
1'b0;
assign sd_wr[2] = (drive_index == 3'd3) ? wd1793_sd_wr:
1'b0;
assign sd_wr[3] = (drive_index == 3'd4) ? wd1793_sd_wr:
1'b0;
assign wd1793_sd_ack = (drive_index == 3'd1) ? sd_ack[0]:
(drive_index == 3'd2) ? sd_ack[1]:
(drive_index == 3'd3) ? sd_ack[2]:
(drive_index == 3'd4) ? sd_ack[3]:
sd_ack[0]; // default is drive 1
assign sd_buff_din[0] = wd1793_sd_buff_din;
assign sd_buff_din[1] = wd1793_sd_buff_din;
assign sd_buff_din[2] = wd1793_sd_buff_din;
assign sd_buff_din[3] = wd1793_sd_buff_din;
// Data bus selection
assign DATA_1793 = (drive_index == 3'd1) ? dout[0]:
(drive_index == 3'd2) ? dout[1]:
(drive_index == 3'd3) ? dout[2]:
(drive_index == 3'd4) ? dout[3]:
8'd0;
// The SD_BLK interface and thus the wd1793 will allways transfer 1 blk. This is blk qty - 1 per spec.
@@ -358,13 +385,6 @@ reg drive_wp[4];
reg [3:0] drive_ready = 4'B0000;
reg [3:0] double_sided = 4'B0000;
reg [23:0] drive_size[4];
wire [23:0] selected_drive_size;
wire [31:0] wd1793_sd_lba;
wire wd1793_sd_rd;
wire wd1793_sd_wr;
wire wd1793_sd_ack;
wire [7:0] wd1793_sd_buff_din;
wire selected_drive_ready, selected_drive_wp, selected_double_sided;
// As drives are mounted in MISTer this logic saves the write protect and generates ready for
@@ -413,28 +433,6 @@ begin
//double_sided[3]<= img_size > 20'd368600;//20'd368640;
end
assign selected_drive_size = (drive_index == 3'd1) ? drive_size[0]:
(drive_index == 3'd2) ? drive_size[1]:
(drive_index == 3'd3) ? drive_size[2]:
(drive_index == 3'd4) ? drive_size[3]:
drive_size[0]; // default is drive 1
assign selected_drive_wp = (drive_index == 3'd1) ? drive_wp[0]:
(drive_index == 3'd2) ? drive_wp[1]:
(drive_index == 3'd3) ? drive_wp[2]:
(drive_index == 3'd4) ? drive_wp[3]:
drive_wp[0]; // default is drive 1
assign selected_double_sided= (drive_index == 3'd1) ? double_sided[0]:
(drive_index == 3'd2) ? double_sided[1]:
(drive_index == 3'd3) ? double_sided[2]:
double_sided[0]; // default is drive 1
assign selected_drive_ready = (drive_index == 3'd1) ? drive_ready[0]:
(drive_index == 3'd2) ? drive_ready[1]:
(drive_index == 3'd3) ? drive_ready[2]:
(drive_index == 3'd4) ? drive_ready[3]:
1'b0; // default is not ready
wd1793 #(1,0) coco_wd1793_0
(
@@ -442,34 +440,160 @@ wd1793 #(1,0) coco_wd1793_0
.ce(ena_8Mhz),
.reset(~RESET_N),
.io_en(1'b1),
.rd(RD),
.wr(WR),
.rd(RD[0]),
.wr(WR[0]),
.addr(ADDRESS_L[1:0]),
.din(DATA_IN_L),
.dout(DATA_1793),
.drq(selected_DRQ),
.intrq(selected_INTRQ),
.dout(dout[0]),
.drq(DRQ[0]),
.intrq(INTRQ[0]),
.img_mounted(1'b0),
.img_mounted_overide(1'b1),
.img_size(selected_drive_size[19:0]),
.img_size(drive_size[0]),
.sd_lba(wd1793_sd_lba),
.sd_rd(wd1793_sd_rd),
.sd_wr(wd1793_sd_wr),
.sd_ack(wd1793_sd_ack),
.sd_lba(sd_lba[0]),
.sd_rd(sd_rd[0]),
.sd_wr(sd_wr[0]),
.sd_ack(sd_ack[0]),
.sd_buff_addr(sd_buff_addr),
.sd_buff_dout(sd_buff_dout),
.sd_buff_din(wd1793_sd_buff_din),
.sd_buff_din(sd_buff_din[0]),
.sd_buff_wr(sd_buff_wr),
.wp(selected_drive_wp),
.wp(drive_wp[0]),
.size_code(3'd5), // 5 is 18 sector x 256 bits COCO standard
.layout(~selected_double_sided), // 0 = Track-Side-Sector, 1 - Side-Track-Sector
.side(selected_double_sided & DRIVE_SEL_EXT[3]),
.ready(selected_drive_ready),
.layout(~double_sided[0]), // 0 = Track-Side-Sector, 1 - Side-Track-Sector
.side(double_sided[0] & DRIVE_SEL_EXT[3]),
.ready(drive_ready[0]),
.input_active(0), // Section not used
.input_addr(0),
.input_data(0),
.input_wr(0),
.buff_din(0)
);
wd1793 #(1,0) coco_wd1793_1
(
.clk_sys(~CLK),
.ce(ena_8Mhz),
.reset(~RESET_N),
.io_en(1'b1),
.rd(RD[1]),
.wr(WR[1]),
.addr(ADDRESS_L[1:0]),
.din(DATA_IN_L),
.dout(dout[1]),
.drq(DRQ[1]),
.intrq(INTRQ[1]),
.img_mounted(1'b0),
.img_mounted_overide(1'b1),
.img_size(drive_size[1]),
.sd_lba(sd_lba[1]),
.sd_rd(sd_rd[1]),
.sd_wr(sd_wr[1]),
.sd_ack(sd_ack[1]),
.sd_buff_addr(sd_buff_addr),
.sd_buff_dout(sd_buff_dout),
.sd_buff_din(sd_buff_din[1]),
.sd_buff_wr(sd_buff_wr),
.wp(drive_wp[1]),
.size_code(3'd5), // 5 is 18 sector x 256 bits COCO standard
.layout(~double_sided[1]), // 0 = Track-Side-Sector, 1 - Side-Track-Sector
.side(double_sided[1] & DRIVE_SEL_EXT[3]),
.ready(drive_ready[1]),
.input_active(0), // Section not used
.input_addr(0),
.input_data(0),
.input_wr(0),
.buff_din(0)
);
wd1793 #(1,0) coco_wd1793_2
(
.clk_sys(~CLK),
.ce(ena_8Mhz),
.reset(~RESET_N),
.io_en(1'b1),
.rd(RD[2]),
.wr(WR[2]),
.addr(ADDRESS_L[1:0]),
.din(DATA_IN_L),
.dout(dout[2]),
.drq(DRQ[2]),
.intrq(INTRQ[2]),
.img_mounted(1'b0),
.img_mounted_overide(1'b1),
.img_size(drive_size[2]),
.sd_lba(sd_lba[2]),
.sd_rd(sd_rd[2]),
.sd_wr(sd_wr[2]),
.sd_ack(sd_ack[2]),
.sd_buff_addr(sd_buff_addr),
.sd_buff_dout(sd_buff_dout),
.sd_buff_din(sd_buff_din[2]),
.sd_buff_wr(sd_buff_wr),
.wp(drive_wp[2]),
.size_code(3'd5), // 5 is 18 sector x 256 bits COCO standard
.layout(~double_sided[2]), // 0 = Track-Side-Sector, 1 - Side-Track-Sector
.side(double_sided[2] & DRIVE_SEL_EXT[3]),
.ready(drive_ready[2]),
.input_active(0), // Section not used
.input_addr(0),
.input_data(0),
.input_wr(0),
.buff_din(0)
);
wd1793 #(1,0) coco_wd1793_3
(
.clk_sys(~CLK),
.ce(ena_8Mhz),
.reset(~RESET_N),
.io_en(1'b1),
.rd(RD[3]),
.wr(WR[3]),
.addr(ADDRESS_L[1:0]),
.din(DATA_IN_L),
.dout(dout[3]),
.drq(DRQ[3]),
.intrq(INTRQ[3]),
.img_mounted(1'b0),
.img_mounted_overide(1'b1),
.img_size(drive_size[3]),
.sd_lba(sd_lba[3]),
.sd_rd(sd_rd[3]),
.sd_wr(sd_wr[3]),
.sd_ack(sd_ack[3]),
.sd_buff_addr(sd_buff_addr),
.sd_buff_dout(sd_buff_dout),
.sd_buff_din(sd_buff_din[3]),
.sd_buff_wr(sd_buff_wr),
.wp(drive_wp[3]),
.size_code(3'd5), // 5 is 18 sector x 256 bits COCO standard
.layout(1'b1), // 0 = Track-Side-Sector, 1 - Side-Track-Sector
.side(1'b0),
.ready(drive_ready[3]),
.input_active(0), // Section not used
.input_addr(0),