Initial Baseline for feature Cassette Write

Fix 1 bit time...
This commit is contained in:
shodge12 committed 2024-03-23 00:25:55 -04:00
1 parent f940be1a2b
commit 06e91ee2ae
6 files changed
+838 -159

No files matched your search

+36 -8
View File
@@ -146,21 +146,21 @@ input ioctl_wr,
input [15:0] ioctl_index,
// SD block level interface
input [5:0] img_mounted, // signaling that new image has been mounted
input [6:0] img_mounted, // signaling that new image has been mounted
input img_readonly, // mounted as read only. valid only for active bit in img_mounted
input [63:0] img_size, // size of image in bytes. 1MB MAX!
output [31:0] sd_lba[6],
output [5:0] sd_blk_cnt[6], // number of blocks-1, total size ((sd_blk_cnt+1)*(1<<(BLKSZ+7))) must be <= 16384!
output [31:0] sd_lba[7],
output [5:0] sd_blk_cnt[7], // number of blocks-1, total size ((sd_blk_cnt+1)*(1<<(BLKSZ+7))) must be <= 16384!
output reg [5:0] sd_rd,
output reg [5:0] sd_wr,
input [5:0] sd_ack,
output reg [6:0] sd_rd,
output reg [6:0] sd_wr,
input [6:0] sd_ack,
// SD byte level access. Signals for 2-PORT altsyncram.
input [8:0] sd_buff_addr,
input [7:0] sd_buff_dout,
output [7:0] sd_buff_din[6],
output [7:0] sd_buff_din[7],
input sd_buff_wr,
// GPIO
@@ -171,7 +171,7 @@ input EE_N,
input PHASE,
output [31:0] PROBE,
// Cassette
// Cassette Input linkage
output clk_Q_out,
output cas_relay,
input casdout,
@@ -3987,4 +3987,32 @@ glb6551 RS232(
.DSR(UART_DSR)
);
Cassette_Write CoCo3_Cassette_Write(
.RESET_N(RESET_N),
.CLK(clk_sys),
.CLK_1_78(clk_1_78),
.CASS_REWIND_RECORD(SWITCH[3]),
.MOTOR_ON(CAS_MTR),
.DTOA_CODE(DTOA_CODE),
// SD block level interface
.img_mounted(img_mounted[6]), // signaling that new image has been mounted
.img_readonly(img_readonly), // mounted as read only. valid only for active bit in img_mounted
.img_size(img_size), // size of image in bytes.
.sd_lba(sd_lba[6]),
.sd_blk_cnt(sd_blk_cnt[6]), // number of blocks-1, total size ((sd_blk_cnt+1)*(1<<(BLKSZ+7))) must be <= 16384!
.sd_rd(sd_rd[6]),
.sd_wr(sd_wr[6]),
.sd_ack(sd_ack[6]),
// SD byte level access. Signals for 2-PORT altsyncram.
.sd_buff_addr(sd_buff_addr),
.sd_buff_dout(sd_buff_dout),
.sd_buff_din(sd_buff_din[6]),
.sd_buff_wr(sd_buff_wr)
);
endmodule